VW Touran manuals

Volkswagen Touran Service Manual: Battery Safety Precautions

Recognizing and Preventing Risks
Batteries present risks. Read the warnings on the battery label, in the owner's manual and in ELSA to prevent these risks.
  WARNING
Personnel instructed in protection, such as a trainee or apprentice, may only perform work on vehicle batteries under the supervision of technical personnel such as a master automotive mechanic or a master automotive electrician.
Acid has strong corrosive properties. If batteries are handled inappropriately, there is a risk that personal injury may result from exposure to harmful electrolyte influences. Therefore, suitable remedies for acid damage must be kept readily available. For example, soap solution is a suitable material.
If electrolyte drips out from the battery, skin can be burned by acid or the vehicle may be affected by acid erosion and corrosion. It is a possibility that safety-related vehicle components can be damaged.
When charging and when resting after charging, explosive gas is present. In extreme cases, if the battery is handled inappropriately, the emitted gases may cause the battery to explode.
Batteries whose visual indicators are bright yellow must be replaced. They may not be tested or charged and jump starting may not be used. There is a risk of explosion during testing, charging or jump starting.
Generating sparks by sanding, welding, separating work and open flame, for example, smoking in vicinity of the battery, is prohibited. Producing sparks through electrostatic discharge must also be avoided. Always touch the vehicle body before touching the battery.
Only perform battery procedures in suitable and well-ventilated locations.
   
Battery
Battery General Information   WARNING Risk of injury. Follow all Warnings and Safety Precautions. Refer to →& ...

Battery Safety Label
Battery Safety Label 1. -  When working in the area of batteries, fire, sparks, open flame and smoking are prohibited. Avoid sparks wh ...

Other materials:

Wheel cover
Fig. 204 Removing the wheel covers First read and observe the introductory information and safety warnings Removing the wheel covers Take the box spanner and wire hook from the tool kit   . Insert the wire hook into one of the holes in the wheel cover. Push the box spanner t ...

Run-Flat Tire PAX, Examining
Pay special attention to the following criteria when examining the tire: Surface erosion or marbling on the inner side (pressure was too low or insufficient for the load)     ...

Oxygen Sensor Unit Protective Pipes
  Note In addition to using the part number, the protective pipe can also be used for identification. Version D1, 6 openings, 3.5 mm each     Only used with the 4-pin oxygen sen ...

© 2016-2018 Copyright www.vwtouran.net