The following actions must always be carried out in the given order in preparation for filling a wheel :

In the event of a flat tyre, park your vehicle on a flat and solid surface at a safe distance from the flow of traffic.

Apply the handbrake Braking, stopping and parking Brakes Parking .

Automatic gearbox: move the selector lever to position P Changing gear Changing gear Automatic gearbox see Automatic gearbox_0 Automatic gearbox see Changing gear_0 Automatic gearbox Manual gearbox see Changing gear_0 Manual gearbox .

Stop the engine and remove the key from the ignition Starting and stopping the engine Engine and ignition Ignition see Engine and ignition_0 .

Manual gearbox: select a gear Changing gear Changing gear Automatic gearbox see Automatic gearbox_0 Automatic gearbox see Changing gear_0 Automatic gearbox Manual gearbox see Changing gear_0 Manual gearbox .

Make sure all vehicle occupants exit the vehicle and move to safety, for instance behind the safety barrier.

Switch on the hazard warning lights and position the warning triangle In an emergency Emergency . Observe any legal requirements.

Check whether the puncture can be repaired with the breakdown set Breakdown set Do not use_2 The tyre sealant must not be used:.

When towing a trailer: unhitch the trailer from the vehicle and park it properly.

When the luggage compartment is loaded: remove items of luggage.

Take the breakdown set out of the luggage compartment.

Take the sticker ② from the breakdown set and stick it on the dash panel within the driver's field of vision.

Do not remove foreign objects (e.g. screws or nails) from the tyre.

WARNING
Preparations
Sealing and inflating tyresVolkswagen Touran Owners Manual. Vents
Fig. 162 In the dash panel: vents
Fig. 163 In the rear section of the centre
console: vents for rear ventilation
First read and observe the introductory information
and safety warnings Vents
To ensure that the vehicle interior is sufficiently heated, ventilated and cooled,
you should ne ...
Volkswagen Touran Service Manual. Gloss Level Adjustment of HS Clear Lacquer and HS Top Coat
Adjusting of varying gloss grades of HS clear lacquer and HS
top coat by mixing Matting Component -LVM 769 810 A2- for
plastic and metal surfaces
The reference material that addresses the factors that
affect gloss grade in these instruct ...