Volkswagen Touran Owners Manual: Cleaning and caring for chrome and aluminium trim parts

Volkswagen Touran Owners Manual / Cleaning and maintenance / Vehicle care and maintenance / Caring for and cleaning the vehicle exterior / Cleaning and caring for chrome and aluminium trim parts

First read and observe the introductory information and safety warnings

Use a damp, clean, lint-free and soft cloth to clean the surfaces.

For heavy soiling use a special solvent-free cleaning product.

Polish the chrome and aluminium trim parts using a soft, dry cloth.

NOTICE

To ensure that the chrome and aluminium parts are not damaged:

Do not clean or polish in direct sunlight.

Do not clean or polish in sandy or dusty environments.

Do not use any abrasive care products (e.g. cream cleaners).

Never clean with insect removing sponges, rough kitchen sponges or similar products.

Do not polish any dirty surfaces.

Do not use solvent-based cleaning products.

Do not use any hard wax.

NOTICE

Chrome rims or wheel covers may also have an additional varnish finish and may not be treated using chrome or aluminium cleaning agents or chrome or aluminium polish. Instead, a normal commercially available paint cleaning product should be used.

Waxing and polishing the vehicle

First read and observe the introductory information and safety warnings Waxing Waxing protects the paintwork. You will need to wax the vehicle with a good hard wax at the latest when the water d ...

Cleaning wheels

First read and observe the introductory information and safety warnings Cleaning steel wheels Use an industrial cleaner to remove brake dust. Steel wheels should therefore be cleaned regularly ...

Other materials:

Information on the brakes
First read and observe the introductory information and safety warnings New brake pads cannot generate the full braking effect during the first 200 to 300 km and must first be run in . The slightly reduced brake pressure can however be compensated for by increasing pressure on the brake ...

Introduction
This chapter contains information on the following subjects: → Indicator lamps → Information on changing a bulb → Changing bulbs in the front headlights → Changing bulbs in the front bumper → Changing bulbs in the tail light cluster in t ...

Support Mode with Battery Charger -VAS5903
General Information The support mode provides the vehicle electrical system with voltage when the battery is removed or disconnected. For more information. Refer to Battery Charger -VAS5903- Operating Instructions. ...