Volkswagen Touran Service Manual: Flat Spots, Correcting
| Flat spots cannot be removed from tires with workshop
equipment. |
| Such flat spots can be "driven out" only by driving the car
until the tires are warm. |
| We do not recommend the following method during cold or
winter weather. |
| |
Check the tire pressure and correct, if necessary. |
| |
If possible, drive the vehicle on an expressway. |
| |
If the traffic and road conditions permit, drive at a speed
of 120 km/h to 150 km/h (74.56 to 93.2 mph) for a distance of 20
to 30 km. |
WARNING
| Do not endanger yourself or other persons during
this road test. |
| Follow all traffic regulations and speed limits when
performing the road test. |
|
| |
Lift the vehicle immediately after the performing the road
test. |
| |
Remove the wheels from the vehicle. |
| |
Balance the wheels on the stationary balancing machine.
Refer to
→ Chapter "Wheel, Balancing". |
|
|
|
Vibration, Causes for Vibration
There are many causes for vibration. Vibration can also be
caused by tire wear, among other things. Tire wear caused by
driving does ...
Other materials:
Loading the trailer
First read and observe the introductory information
and safety warnings Trailer weight and drawbar load
The trailer weight is the weight that the vehicle can pull
. The drawbar load is the weight that the towing bracket exerts on the ball coupling
vertically from above . ...
General Information
In order to be able to force moisture and other contaminants
out of refrigerant circuit, compressed air and nitrogen (to
force moisture out of refrigerant circuit) are to be used.
For the most part, blowing through the refrigerant circui ...
Waxing and polishing the vehicle
First read and observe the introductory
information and safety warnings Waxing
Waxing protects the paintwork. You will need to wax the vehicle with a good
hard wax at the latest when the water does not clearly form
small drops and run off the paintwork when it is clean.
Even if a wax solut ...
© 2016-2018 Copyright www.vwtouran.net
Vibration