VW Touran manuals

Volkswagen Touran Service Manual: Hub Cap for Alloy Wheels with Open Threaded Connection, Removing and Installing

Volkswagen Touran Service Manual / Wheel  and Tire Guide Information / Rim Information / Hub Cap for Alloy Wheels with Open Threaded Connection, Removing and Installing

Removing
The wheel is removed.
  Note
   
Hold the cap secure -1- with the hammer.
Installing
  Hub Cap for Alloy Wheels with Open Threaded Connection, Removing and Installing
  Hold the cap -1- flush against the opening in the aluminum rim.
  Line up the Volkswagen logo on the cap with the valve so that the logo is centered over the valve -2-.
  Press on the cap so that it is secure inside the opening in the aluminum rim.
  Make sure the cap it secure inside the aluminum rim.
  Hub Cap for Alloy Wheels with Open Threaded Connection, Removing and Installing
Light Alloy Wheels, Preparing
  WARNING Do not repair damaged rims by heating, welding or adding or removing material. ...

Decorative Trims, Replacing
...

Other materials:

Fitting the rear towing eye
Fig. 228 Rear bumper, right-hand side: screwing in the towing eye First read and observe the introductory information and safety warnings The towing eye is screwed into a threaded hole on the right of the rear bumper  . In vehicles with a factory-fitted towing bracket there is no mount ...

Introduction
This chapter contains information on the following subjects:  → Storing    → Contents   Observe any country-specific legislation when securing your vehicle in the event of a breakdown. Additional information and warnings: Preparation for working in the engine compartmen ...

Introduction
This chapter contains information on the following subjects:  → Warning lamps and indicator lamps    → Pedals    → Manual gearbox: selecting a gear    → Automatic gearbox: selecting a gear    → Changing gear using Tiptronic    → Driving wi ...

© 2016-2018 Copyright www.vwtouran.net