This chapter contains information on the following subjects:
→ Warning lamp and coolant temperature display
→ Coolant specification→ Checking coolant level and refilling coolant
Never carry out any work on the engine coolant system if you are not familiar with the necessary procedures and if only unsuitable tools as well as incorrect operating equipment and fluids are available ! Have the work carried out by a qualified workshop if you are uncertain. Volkswagen recommends using a Volkswagen dealership for this purpose.
Serious injuries can be caused if work is carried out incorrectly.
Additional information and warnings:

WARNING
Coolant and coolant additives can pollute the environment. Spilt operating fluids must be collected and disposed of properly and with respect for the environment.
Coolant
Warning lamp and coolant temperature displayVolkswagen Touran Owners Manual. Switch of the lane departure warning system in the following situations
First read and observe the introductory information
and safety warnings The lane departure warning system should be switched
off due to system limitations in the following situations:
When a high level of concentration is required by the driver.
Very sporty driving.
Poor weath ...
Volkswagen Touran Service Manual. CAN Bus Wires, Repairing
Unshielded two-strand wiring -1-
and -2- with a cross section of
0.35 mm2 or 0.5 mm2
can be used as CAN bus wiring.
The color coding of CAN bus wires can be found in the
following table:
...