Volkswagen Touran Service Manual: Leaks or Internal Damage, for Example Noises or No Output

Volkswagen Touran Service Manual / Heating, Ventilation and Air Conditioning / Components, Replacing / A/C Compressor, Replacing / Leaks or Internal Damage, for Example Noises or No Output

Note

For vehicles with an electrically-driven A/C compressor, de-energize the high voltage system before removing the A/C compressor. Refer to → Electrical System Hybrid; Rep. Gr.93.

Discharge the refrigerant circuit.

Remove the A/C compressor.

Note

In the case of internal damage (on A/C compressor), flush refrigerant circuit with refrigerant R134a. Refer to → Chapter "Refrigerant Circuit, Flushing (Cleaning) with Refrigerant R134a".

If a different A/C compressor is installed with a different refrigerant oil, the refrigerant circuit is to be flushed with refrigerant R134a. Refer to → Chapter "Refrigerant Circuit, Flushing (Cleaning) with Refrigerant R134a".

Replace receiver/dryer/dryer cartridge and expansion valve or reservoir and restrictor.

If a leak is present, check the expansion valve for debris or corrosion and replace if necessary.

Assemble, evacuate and charge the refrigerant circuit.

Flushing Not Necessary

Note For vehicles with an electrically-driven A/C compressor, de-energize the high voltage system before removing the A/C compressor. Refer to &# ...

Receiver/Dryer or Reservoir and Restrictor, Replacing

...

Other materials:

Volkswagen Touran Owners Manual. Securing mounts, roof bars or load carrying system
Fig. 104 Vehicles without roof rails: attachment points for mounts Fig. 105 Vehicles with roof railings: attachment area for roof bars First read and observe the introductory information and safety warnings Mounts or roof bars serve as the basis for special load carrier systems. Sp ...

Volkswagen Touran Owners Manual. Cleaning the engine compartment
First read and observe the introductory information and safety warnings The engine compartment of any motor vehicle is a hazardous area . The engine compartment should be cleaned by a qualified workshop. An incorrect cleaning procedure could possibly remove corrosion protection and ...