Volkswagen Touran Owners Manual: Removing the ball coupling
First read and observe the introductory information
and safety warnings
- Unhitch the trailer .
- Remove the cover from the lock on the handwheel.
- Insert the key ⑧ into the lock and turn it clockwise.
- Hold the ball coupling tightly in your left hand .
- Use your right hand to pull out the handwheel ⑦ in the direction of arrow 1 and keep it in this position.
- Turn the handwheel ⑦ in the direction of arrow 2 until it engages.
- Keep the handwheel in this position and guide the ball coupling downwards out of the mounting. The ball coupling is now in the ready position.
- Let go of the handwheel and stow the pre-tensioned ball coupling safely with the vehicle tools.
- Pivot the trailer socket back fully from left to right to prevent soiling and damage to the mounting.
- Insert the cover back into the bumper until it clicks into place.
WARNING
- Only unlock the ball coupling once the trailer has been unhitched.
Fitting the removable ball coupling
Fig. 106 Overview: removable
ball coupling
Fig. 107 In the rear bumper:
removing the cover of the towing bracket.
First read and observe the introductory information
and safety warnings̴ ...
Hitching and connecting the trailer
First read and observe the introductory information
and safety warnings Emergency breakaway cable
Always fasten the trailer's emergency breakaway cable properly
to the towing vehicle. Leav ...
Other materials:
Volkswagen Touran Owners Manual. Contents
Fig. 201 Contents of the tool kit
First read and observe the introductory information
and safety warnings The contents of the vehicle tool kit depends on the vehicle
equipment level. The following describes the maximum scope.
The vehicle tool kit comprises the following parts
Ada ...
Volkswagen Touran Service Manual. Aerial Cable Repair Set -VAS6720-
Special tools and workshop equipment
required
Repair Set, Aerial Cable -VAS6720-
Checking the Antenna Wire. Refer to
Replacing the Tool Head. Refer to
Cutting the Antenna W ...