Volkswagen Touran Owners Manual: Settings menu
First read and observe the introductory information
and safety warnings
| Settings menu | Function |
|---|---|
| Language | Setting the language for the display texts and messages in the navigation system. |
| MFD data | Settings for which MFD data should appear in the instrument cluster display . |
| Convenience | Settings for the vehicle's convenience functions . |
| Light & Vision | Settings for the vehicle lighting . |
| Time | For setting the clock hours and minutes both in the instrument cluster and in the navigation system. The time can be shown in a 12 and 24 hour display. An S may be shown in the upper part of the display to indicate that summer time is selected. |
| Winter tyres | Setting the visual and audible speed warning. Use this function only when winter tyres are fitted which are not designed for the vehicle's top speed. |
| Language | Setting the language for the display texts and messages in the navigation system. |
| Units | Setting the units for temperature, consumption values and distances. |
| Assistant | Settings for the various driver assist systems . |
| Second speed | Switching the second speed display on or off. |
| Service | Calling up service messages or resetting service interval displays. |
| Factory setting | Some functions in the Settings menu are reset to the factory settings. |
| Back | The display returns to the main menu. |
MFD (multi-function display) menu
First read and observe the introductory information
and safety warnings The multi-function display (MFD) is equipped with two
automatic memories: 1 - Trip memory and 2 - Total journey
memory. ...
Convenience sub-menu
First read and observe the introductory information
and safety warnings
Convenience menu
Function
Central locking system
Door unlocking ...
Other materials:
Winter Tires with Speed Symbol V
Table. Refer to
→ Anchor.
The tire industry delivers winter tires with V-rating also.
These tires can be applied up to the maximum permissible speed vmax
= 240 km/h (149.13 mph) only under certain conditions.
...
Taper
Taper is caused by slightly offsetting the tread and/or the
belt by a few tenths of a millimeter from the geometric center
of the tire. Taper cannot be recognized visually nor can it be
measured with workshop equipment.
...
Two-Part VHS Hardener and Two-Part VHS Performance Hardener
Definition:
Two-Part VHS Hardener -LHA 009 051 A2-/-LVM 009 051 A5-
Two-Part VHS Hardener, Short -LHA 009 050 A2-
Two-Part VHS Hardener, Long -LHA 009 052 A2-/-LHA 009 052
A3-
...