Volkswagen Touran Owners Manual: Underseal

Volkswagen Touran Owners Manual / Cleaning and maintenance / Vehicle care and maintenance / Caring for and cleaning the vehicle exterior / Underseal

First read and observe the introductory information and safety warnings

The underside of the vehicle is coated to protect it from corrosion and damage. The protective coating on the underside of the vehicle could be damaged when driving. Volkswagen recommends therefore that the protective coating on the underside of the vehicle and on the running gear should be checked regularly and repaired if necessary.

CAUTION

Underseal and anti-corrosion coatings can ignite on the hot exhaust system or on other hot engine parts.

Never apply underseal or anti-corrosion coatings to the exhaust pipes, catalytic converter, heat shields or other vehicle components that become hot.

De-icing door lock cylinders

First read and observe the introductory information and safety warnings Volkswagen recommends the use of genuine Volkswagen spray with lubricating and anti-corrosive properties to de-ice the l ...

Cleaning the engine compartment

First read and observe the introductory information and safety warnings The engine compartment of any motor vehicle is a hazardous area . The engine compartment should be cleaned by a qua ...

Other materials:

Volkswagen Touran Owners Manual. Tyre damage
First read and observe the introductory information and safety warnings Damage to tyres and rims is often not readily visible. If you notice unusual vibration or the car pulling to one side, this may indicate that one of the tyres is damaged . Reduce your speed immediately if you s ...

Volkswagen Touran Service Manual. Parking Aid Sensor, Painting
The following parameters must be met when painting to avoid malfunctions in the parking aid sensor (parking aid system): New Part, Painting Maximum coat thickness 125 mm; the coat thickness must always be measured ...