Volkswagen Touran Owners Manual: Catalytic converter

Volkswagen Touran Owners Manual / Cleaning and maintenance / Vehicle care and maintenance / Engine management system and exhaust purification system / Catalytic converter

First read and observe the introductory information and safety warnings

The catalytic converter is used for exhaust gas post-treatment and helps to reduce exhaust emissions. Observe the following points to ensure that the exhaust system and the catalytic converter in the petrol engine will function for a long time:

Use unleaded petrol only.

Do not allow the fuel tank to run empty.

Do not overfill engine oil .

Do not tow-start the vehicle. Use jump leads .

If you notice misfiring, uneven running or loss of power when the car is moving, reduce speed immediately and have the car inspected at the nearest qualified workshop. If this happens, unburnt fuel can enter the exhaust system and escape into the atmosphere. The catalytic converter can also be damaged by overheating!

Even when the exhaust purification system is working perfectly, there may be a smell of sulphur from the exhaust in some conditions. This depends on the sulphur content of the fuel being used.

Indicator lamps

First read and observe the introductory information and safety warnings Lit up Possible cause Correction Engine management sys ...

Diesel particulate filter

First read and observe the introductory information and safety warnings The diesel particulate filter filters out soot particles in the exhaust gas. The soot particles are collected in the fil ...

Other materials:

Volkswagen Touran Owners Manual. Rims
First read and observe the introductory information and safety warnings The design of the wheel bolts is matched to the rims. If different rims are fitted, the correct wheel bolts with the right length and correctly shaped bolt heads must be used. This ensures that wheels are fitted secure ...

Volkswagen Touran Owners Manual. Running-in
First read and observe the introductory information and safety warnings Please follow the regulations concerning running-in of new parts. Running in a new engine A new engine needs to be run in during the first 1,500 km. During its first few hours of running, the internal friction in the e ...