Volkswagen Touran Owners Manual: Cleaning wheels
First read and observe the introductory
information and safety warnings
Cleaning steel wheels
Use an industrial cleaner to remove brake dust. Steel wheels should therefore be cleaned regularly with a separate sponge.
Any damage to the paint on steel wheels should be touched up before the metal starts to rust.
Caring for and cleaning alloy wheels
Wash grit and brake dust from alloy wheels approximately every two weeks. Then use an acid-free detergent to clean the wheels. Volkswagen recommends applying a hard wax compound to the wheels every three months.
It is important to remove road salt and brake dust by washing the wheels at regular intervals, otherwise the finish will be impaired.
Always use an acid-free detergent for alloy wheels. Car polish or other abrasive agents should not be used on the wheels.
If the protective coating is damaged, e.g. by stone impact, the damaged area should be repaired immediately.
Cleaning and caring for chrome and aluminium trim parts
First read and observe the introductory
information and safety warnings
Use a damp, clean, lint-free and soft cloth to clean the surfaces.
For heavy soiling use a special solvent-free cle ...
Care of rubber seals
First read and observe the introductory
information and safety warnings The rubber seals on the doors, windows,
panoramic sliding roof etc. will seal better, remain flexible and last longer if
...
Other materials:
Volkswagen Touran Service Manual. Two-Part HS Optimum Plus Clear Coat
Definition:
Two-Part HS Optimum Plus Clear Coat -LZK 769 K07 A5-
Edition 04/2013
Product Description
The two-part HS optimum plus clear coat is a VOC compliant
high solid cle ...
Volkswagen Touran Service Manual. Taper
Taper is caused by slightly offsetting the tread and/or the
belt by a few tenths of a millimeter from the geometric center
of the tire. Taper cannot be recognized visually nor can it be
measured with workshop equipment.
...
