This chapter contains information on the following subjects:
→ Fuses in the vehicle
→ Changing a blown fuseAt the time of print we are unable to provide an up-to-date overview of the locations of the fuses for the electrical consumers. This is because the vehicle is under constant development, because fuses are assigned differently depending on the vehicle equipment level and because several consumers may use a single fuse. You can get more information about the fuse layout from a Volkswagen dealership.
Several electrical consumers could share a single fuse. Conversely, a single consumer could have more than one fuse.
Therefore, fuses should only be replaced when the cause of a fault has been rectified. If a newly inserted fuse blows after a short time, the electrical system must be checked by a qualified workshop as soon as possible.
Additional information and warnings:

WARNING

WARNING

NOTICE
A single consumer could have more than one fuse.
Several consumers could share a single fuse.
Fuses
Fuses in the vehicleVolkswagen Touran Owners Manual. Various securing systems
Fig. 71 On the rear seats:
figures Ⓐ and Ⓑ illustrate the main securing points for the child restraint system
on the lower retaining rings and top tether. Figure Ⓒ shows how to secure the child
restraint system using the vehicle's seat belt
First read and observe the introd ...
Volkswagen Touran Owners Manual. Fitting the rear towing eye
Fig. 228 Rear bumper, right-hand side:
screwing in the towing eye
First read and observe the introductory information
and safety warnings The towing eye is screwed into a threaded hole on the
right of the rear bumper . In vehicles with a factory-fitted towing bracket
there is no mount ...