
Fig. 104 Vehicles without roof rails: attachment points for mounts

Fig. 105 Vehicles with roof railings: attachment area for roof bars
First read and observe the introductory information
and safety warnings Mounts or roof bars serve as the basis for special load carrier systems. Special load carriers must then be added to transport luggage, bicycles, skis, surfboards or boats safely. Suitable accessories are available from your Volkswagen dealership.
Vehicles without roof railings: attaching mounts and load carrier system
Mounts and load carriers must always be attached correctly.
Please read the fitting instructions provided.
The attaching holes are on the underside of the roof bracing. They are visible only when the door is open .
After fitting the mounts properly as per the instructions provided, attach the load carrier to the mount.
Vehicles with roof railings: attaching roof bars and load carrier system
Roof bars and load carriers must always be attached correctly.
Please read the fitting instructions provided.
The roof bars are attached to the roof railing. The roof bars should be approximately 70 – 75 cm apart .
After fitting the roof bars properly as per the instructions provided, attach the load carrier to the roof bars.

WARNING
Read and note the fitting instructions for the mounts, roof bars and the load carrier system provided and always carry the instructions in the vehicle.
Introduction
Loading the load carrier systemVolkswagen Touran Owners Manual. Cleaning and caring for natural leather covers
First read and observe the introductory
information and safety warnings Please contact a Volkswagen dealership or
other qualified workshop if you have any questions on cleaning and caring for
the leather equipment in your vehicle.
Care and use
Natural leather is sensitive as it does not h ...
Volkswagen Touran Owners Manual. Wheel cover
Fig. 204 Removing the wheel covers
First read and observe the introductory information
and safety warnings Removing the wheel covers
Take the box spanner and wire hook from the tool kit .
Insert the wire hook into one of the holes in the wheel cover.
Push the box spanner t ...