
Fig. 76 Next to the steering wheel: examples of the various light switches
First read and observe the introductory information
and safety warnings Observe any country-specific regulations when using vehicle lighting.
In vehicles with a factory-fitted towing bracket: the vehicle's rear fog lights are switched off automatically if a trailer with rear fog lights is electrically connected to the vehicle.
| Turn the light switch to the desired position : | ||
|---|---|---|
| When the ignition is switched off | When the ignition is switched on | |
|
The fog lights, dipped beam headlights and side lights are switched off. | Lights switched off or daytime headlights are switched on. |
|
The orientation lighting can be switched on. | The automatic headlight control and, if applicable, the daytime headlights are switched on. |
|
The side lights are switched on. | The side lights are switched on. |
|
The dipped beams are switched off. The side lights may still light up for a short time. | The dipped beam headlights are switched on. |
Fog lights:
The indicator lamps
or
in the light switch indicate that the
fog lights are switched on.
on:
pull the light switch out of the position
or
to the first stop.
on:
pull the light switch out of position
or
as far as it will go.
. Audible warnings if lights are not switched off
If the key is removed from the ignition lock and the driver door is opened, an audible warning will sound in any of the following situations. That will remind you to switch off the lights as necessary.
. 
WARNING
Turn signal and main beam lever
Lights and vision – functionsVolkswagen Touran Owners Manual. Cleaning seat belts
First read and observe the introductory
information and safety warnings The automatic belt will not be able to
roll back properly if there is dirt on the belt and thus prevent the seat belt
from working properly.
The seat belts must never be removed for cleaning purposes.
Remove dirt ...
Volkswagen Touran Service Manual. Wheel, Balancing with Fine Balancing Machine (Finish Balancer)
Before beginning balancing, the following requirements must
be fulfilled.
The tire pressure must be OK.
The tire profile must not be worn on one side. The tire
profile must be at least 4 mm.
...