Fig. 71 On the rear seats: figures Ⓐ and Ⓑ illustrate the main securing points for the child restraint system on the lower retaining rings and top tether. Figure Ⓒ shows how to secure the child restraint system using the vehicle's seat belt
First read and observe the introductory information and safety warningsAlways secure child seats properly, safely and in accordance with the instructions from the child seat manufacturer.
The fitted child seat must sit close to the vehicle seat and must not be able to move or tip more than 2.5 cm.
Child seats that are intended to be secured using the Top Tether must be secured using the Top Tether in the vehicle . Attach the top tether only to the retaining rings fitted for this purpose. Not all fastening rings can be used with the top tether. Always pull the top tether tightly so that the child seat is secure and fits closely to the seat.
Country-specific securing systems
Variants of the attachment system :
Retaining rings and top tether.
USA: LATCH (Lower Anchors and Tethers for CHildren).
Canada: lower universal anchorages.
.
The systems are made up of attachments for child restraint systems with a top tether and lower anchoring points in the seat.
Volkswagen Touran Owners Manual. Switch of the lane departure warning system in the following situations
First read and observe the introductory information
and safety warnings The lane departure warning system should be switched
off due to system limitations in the following situations:
When a high level of concentration is required by the driver.
Very sporty driving.
Poor weath ...
Volkswagen Touran Service Manual. 6-Pin Universal Oxygen Sensor, Removing and Installing
Note
Use the faulty sensor as a guide for installing all of the
accompanying attachments, cable ties or marking bands.
Do not crimp or cut the wires otherwise the functionality of
the heated oxygen sensor (HO2S) will ...