Volkswagen Touran Service Manual: 6-Pin Universal Oxygen Sensor, Removing and Installing
 Note
| Use the faulty sensor as a guide for installing all of the
accompanying attachments, cable ties or marking bands. |
| Do not crimp or cut the wires otherwise the functionality of
the heated oxygen sensor (HO2S) will be diminished. |
| |
Remove the old heated oxygen sensor (HO2S). |
|
|
|
| |
Lay both of the oxygen sensor next to each other so the
sensor housings are the same level. |
|
|
|
| |
Tie the excess length of the sensor (approximately 50 to 250
mm) back so it is the same length as the faulty sensor and
secure it with cable ties -1-. |
| |
Install the new oxygen sensor in the vehicle. |
|
|
|
Note
Do not repair the heated oxygen sensor wires. Repairing may
result in malfunctions.
Use the faulty sensor as a guide ...
Note
In addition to using the part number, the protective pipe
can also be used for identification.
Version D1, 6 openings, 3.5 mm eac ...
Other materials:
Volkswagen Touran Owners Manual. Checklist
In some countries, special safety standards and emissions-related
legislation apply that may differ from the construction of the vehicle. Volkswagen
recommends that you visit your Volkswagen dealer before travelling abroad to
find out about any legal requirements and the following points ...
Volkswagen Touran Owners Manual. Panoramic sliding roof – functions
First read and observe the introductory information
and safety warnings Convenience opening and closing
The panoramic sliding roof can be opened and closed from
outside the vehicle using the vehicle key:
Press and hold the locking or unlocking button in the vehicle key. The panoramic ...
© 2016-2026 Copyright www.vwtouran.net | 0.0061
4-Pin Heated Oxygen Sensor (HO2S), Removing and Installing
Oxygen Sensor Unit Protective Pipes