Volkswagen Touran Owners Manual: Changing the wheel

Volkswagen Touran Owners Manual / If and when / Practical tips / Changing a wheel / Changing the wheel

Fig. 210 Changing the wheel: removing the wheel bolts with the screwdriver handle

First read and observe the introductory information and safety warnings

Removing the wheel

Read the checklist .

Loosen the wheel bolts .

Jack up the vehicle .

Using the hexagonal socket in the screwdriver handle , unscrew the loosened wheel bolts, remove and place on a clean surface.

Remove the wheel.

Fitting the spare wheel or temporary spare wheel

If applicable, take note of the running direction of the tyre .

Position the spare wheel / temporary spare wheel.

Insert the anti-theft wheel bolt using the adapter at position or ③ and tighten it slightly in a clockwise direction.

Screw in all the other wheel bolts in a clockwise direction and use the hexagonal socket in the screwdriver handle to tighten them gently.

Lower the vehicle with the jack.

Use the box spanner to tighten all the wheel bolts securely in a clockwise direction . Do not tighten the bolts in clockwise or anti-clockwise sequence. Tighten them in diagonal sequence.

Fit the cover caps, centre covers or wheel covers .

WARNING

An incorrect torque or incorrectly handled wheel bolts can lead to a loss of control over the vehicle, cause accidents and serious injuries.

Always keep all wheel bolts and threads in the wheel hubs clean and free from oil and grease. The wheel bolts must be easy to turn and be tightened to the specified torque.

The hexagonal socket in the screwdriver handle should be used for turning wheel bolts only. Do not use it to loosen or tighten the wheel bolts.

Checklist

To ensure your own safety and the safety of your passengers, observe the following points in the order given : Find a flat and firm surface suitable for lifting the vehicle. Stop th ...

After changing a wheel

First read and observe the introductory information and safety warnings If needed, clean the tools then place them back in the foam rubber holder in the luggage compartment or behind the sid ...

Other materials:

Volkswagen Touran Service Manual. Severely Discharged Battery, Charging with Battery Charger -VAS5903-
Special tools and workshop equipment required Battery Charger -VAS5903- WARNING Risk of injury. Follow all Warnings and Safety Precautions. Refer to → ...

Volkswagen Touran Service Manual. Single Wire Seal Assembly Tools
Assembly tools serve the purpose of allowing the single wire seals to be slid without damage into terminal housing up to stop, this achieves a complete seal between single wire and terminal housing. Four assembly tools for single wire se ...