Volkswagen Touran Owners Manual: Cleaning and changing windscreen wiper blades
Fig. 181 Changing the windscreen wiper blades
Fig. 182 Changing the wiper blade for the rear window
First read and observe the introductory
information and safety warnings The factory-fitted windscreen wiper blades are coated with graphite. The graphite coating ensures that windscreen wiper blade moves quietly over the windscreen. If the graphite coating is damaged, the windscreen wiper will become louder.
Regularly check the condition of the wiper blades. Rubbing wiper blades should be changed if damaged or cleaned if dirty .
Damaged wiper blades should be replaced immediately. Windscreen wiper blades can be bought from a qualified workshop.
Lifting and folding back the windscreen wiper arms
To lift or fold back a wiper arm take hold only at the wiper blade mounting.
Please note for the windscreen wiper: adjust the wiper arms to the service position before folding back .
Cleaning windscreen wiper blades
- Lift and fold back the windscreen wiper arms.
- Use a soft cloth to remove dust and dirt carefully from the windscreen wiper blades.
- If the windscreen wiper blades are heavily soiled, clean them carefully with a sponge or cloth .
Changing the windscreen wiper blades
- Lift and fold back the windscreen wiper arms.
- Press and hold release button and pull off the wiper blade in the direction of the arrow at the same time.
- Insert a new wiper blade with the same length and design on to the wiper arm. Push it on until it engages.
- Push the windscreen wiper arm back onto the windscreen.
Changing the wiper blade for the rear window
- Lift and fold back the wiper arm.
- Turn the wiper blade through 90° to disengage it.
- Take hold of the wiper arm with your right hand .
- Pull off the release on the holder in the direction of the arrow . You may need to use some force to do this.
- Remove the wiper blade in the direction of the arrow .
- Insert a new wiper blade with the same length and design on to the wiper arm against the direction of the arrow. Push it on until it engages .
- Push the release against the direction of the arrow in order to lock the wiper blade.
- Push the wiper arm back onto the rear window.
WARNING
- Therefore, always change windscreen wiper blades if they are damaged or worn and no longer clean the windscreen properly.
NOTICE
- Damaged or dirty windscreen wipers could scratch the windscreen.
- Detergents containing solvents, hard sponges and other sharp objects can damage the graphite coating.
- Do not use fuel, nail varnish remover, paint thinner or similar products to clean the windows.
Cleaning windows and exterior mirrors
First read and observe the introductory
information and safety warnings Cleaning windows and exterior mirrors
Moisten the windows and exterior mirrors with commercially available,
alcohol-based ...
Waxing and polishing the vehicle
First read and observe the introductory
information and safety warnings Waxing
Waxing protects the paintwork. You will need to wax the vehicle with a good
hard wax at the latest when the water d ...
Other materials:
Volkswagen Touran Owners Manual. Electrical childproof lock
Fig. 28 In the driver door:
buttons for the electrical childproof lock
First read and observe the introductory information
and safety warnings The electrical childproof lock prevents
the rear doors from being opened from the inside, e.g. so that children cannot open
the doors acciden ...
Volkswagen Touran Owners Manual. Opening or closing the panoramic sliding roof
Fig. 34 In the roof: turn
the switch to open and close
Fig. 35 In the roof: push
and pull the switch to tilt and close
First read and observe the introductory information
and safety warnings In order to tilt the panoramic sliding
roof, the rotary switch must be in position . ...
