VW Touran manuals

Volkswagen Touran Service Manual: Flat Spots

What is a Flat Spot From Standing?
Terms like flat portion, flattening, are also used as a term for flat spots from standing.
Flat spots from standing cause vibration, like an incorrectly balanced wheel. It is important to recognize a flat spot in the tread from standing as such!
Flat spots from standing cannot be corrected by balancing, and can occur again at any time under various circumstances. Flat spots from standing can be corrected without complicated special tools. Providing that the flat spot was not caused by wheel lock during hard braking. Refer to → Chapter "Wear Spots".
  Note
Wear spots due to wheel lock are irreparable! Tires with such damage must be replaced.
Causes of Flat Spots from Standing:
The vehicle stands for several weeks in a location without being moved.
Tire pressure is too low.
The vehicle was placed in a paint system drying cabinet after painting.
The vehicle was parked with warm tires in a cold garage or similar for a long time. In this case, a flat spot can develop overnight.
  Correct the flat spots. Refer to → Chapter "Flat Spots, Correcting".
   
Tires, Evaluating
...

Cracking
Cracking is the term for shallow cracks in the sidewall of the tire. They run starting from the bulge in the direction of the tire shoulder. Se ...

Other materials:

Volkswagen Touran Service Manual. Heel and Toe Wear
Heel-and-toe wear is step-like wear of individual tread blocks, due to which an increased rolling noise can develop. The heel-and-toe wear is caused by the uneven distortion of the tread blocks in the contact patch. Heel-and-toe wear appears in more extr ...

Volkswagen Touran Service Manual. Cross-Section of a Radial Ply Tire
1 -  Tread Block 2 -  Tread Groove 3 -  Tread 4 -  Nylon Ply 5 -  Belt Layers Consists mostly of steel 6 -  Bead Bundle ...

© 2016-2024 Copyright www.vwtouran.net | 0.006