Volkswagen Touran Service Manual: High Pressure Sensor -G65

Volkswagen Touran Service Manual / Heating, Ventilation and Air Conditioning / Refrigerant Circuit General Information / Switches and Sensors on Refrigerant Circuit and Connections / High Pressure Sensor -G65

Note

For switching pressures, removing and installing switches and switch arrangement and version, see vehicle-specific refrigerant circuit.

Refer to → Rep. Gr.87.

This High Pressure Sensor -G65- is installed in place of an A/C Pressure Switch -F129-.

The high-pressure sensor generates a square-wave signal or a data telegram when voltage is applied. This signal changes along with pressure in the system.

The downstream control modules (coolant fan control module, ECM), Front A/C Display Control Head -E87- or Climatronic Control Module -J255-, etc.) use this signal to calculate pressure in the refrigerant circuit and to activate the coolant fans and motor and A/C Clutch -N25- or to change the A/C Compressor Regulator Valve -N280- activation.

A/C Pressure Switch -F129

Note For switching pressures, removing and installing switches and switch arrangement and version, see vehicle-specific refrigerant circuit. ...

A/C Pressure/Temperature Sensor -G395

Note For switching pressures, removing and installing switches and switch arrangement and version, see vehicle-specific refrigerant circuit. ...

Other materials:

Volkswagen Touran Owners Manual. Fitting the front towing eye
Fig. 227 Front bumper, right-hand side: screwing in the towing eye First read and observe the introductory information and safety warnings The towing eye is screwed into a threaded hole on the right of the front bumper . The towing eye must always be kept in the vehicle. Observe the ...

Volkswagen Touran Service Manual. Repair Instructions for the Underbody and Stone Chip Protection
Note The underbody and stone chip protection structure must be restored back to its original layer strength and appearance during a repair. Water drain holes must remain free. All threade ...