Volkswagen Touran Service Manual: Matting Component -LVM 769 810 A2

Volkswagen Touran Service Manual / General Paint Information / Original Products / Additional Materials / Matting Component -LVM 769 810 A2

Definition:

Matting Component -LVM 769 810 A2-

Edition 10/2014

Product Description

With two-part HS clear coats and two-part HS top coat, the Matting Component - LVM 769 810 A2- creates a matted top coat coating for metal and plastic finishes.

Areas of application include large surfaces/complete painting as well as small- and attachment parts.

Application Instructions

Base Surface

Suitable base surfaces:

Hardened, well-preserved and sanded old paint or factory paints

Primed and filled metal- and plastic parts

Note

For information about plastic parts, refer to "The VW/Audi Coating System for Plastic Parts" (Data Sheet 5.74).

Processing

Applicable products:

Two-Part HS Clear Coat -L2K 769 500 A5-

Two-Part HS Vario Clear Coat -L2K 769 K01 A2-

Two-Part HS Optimum Plus Clear Coat -LZK 769 K07 A5-

Two-Part HS Brilliant Plus Clear Coat -LZK 769 K05 A5-

Two-Part HS Performance Clear Coat -LZK 769 K06 A5-

Two-Part HS Mixed Paint/Top Coat -L2K 074/073...-

Two-Part HS Hardener, Long -LHA 009 047 A3-

Two-Part HS Hardener, Extra Long -LHA 009 048 A3-

Two-Part VHS Hardener, Long -LHA 009 052 A2-/-LHA 009 052 A3-

Two-Part VHS Hardener, Extra Long -LHA 009 053 A2-

For hardener, refer to the technical application instructions here → Chapter "Hardener".

Two-Part Thinner -LVE 009 001 A5-

Two-Part Thinner, Long -LVM 009 300 A2-

Two-Part Thinner, Special -LVM 009 200 A2-/-LVM 009 200 A5-

Clear Coat Additive -LVM 007 000 A2-

Gloss Level Adjustment/Matting and Application Instructions

Note

Refer to "Gloss Level Adjustment" (5.75) and "Repair Paint Systems For Matte Painted Vehicles" (5.76).

Application Instructions

Note

The addition of Elastic Additive -ALZ 011 001- is omitted.

Stir or shake the Matting Component -LVM 769 810 A2- in the can well.

With the two-part HS clear coat and two-part HS top coat, mix the Matting Component -LVM 769 810 A2- according to specification and infuse with hardener and thinner just before processing. The processing of the ready-to spray mixture should immediately follow. If the mixture remains in the mixing- or spray gun receptacle for a longer period of time (15 minutes), it should be stirred again before continuing to use (separation).

Adding the matting compound can influence the covering capacity.

It is absolutely necessary to test the respective mixture on sheet metal to achieve the appropriate gloss level for the vehicle. Gloss level measurements (60 angle) at adjacent parts can also be helpful.

A touch-up/repair of the matted clear coat within the surface (for example, side part or clever repair) is not possible.

Dust inclusions cannot be polish out, so therefore ensure that absolute cleanliness is maintained during the entire painting process.

Apart from color-dependent differences, the actual gloss level is influenced by different factors. In the following comparison, various additional parameters and their effect on the gloss levels are represented.

Higher Gloss Level	Lower Gloss Level
shorter hardener	longer hardener
shorter thinner	longer thinner
higher processing viscosity	lower processing viscosity
higher dry layer thickness	lower dry layer thickness
shorter ventilation time	longer ventilation time
forced drying	Air drying

Influencing Factors on the Gloss Level:

Using different hardeners, thinners, application types, drying conditions and layer thicknesses lead to different gloss levels (up to 20%).

Drying

Final drying time with forced drying is a minimum of 15 to 20 minutes

Forced drying at +60 and 65 C (140 and 149 F) object temperature for 45 minutes

Personal Protective Equipment:

Note the safety data sheets

Wear the personal protective equipment during application

Characteristics

Flashpoint:	above +23 C (73.4 F)
VOC value: 2004/42/IIB(e)(840)600	The EU limit for this product (product category IIB.e) in ready-to-use form is a maximum of 840 g/L volatile organic compounds. The VOC-value of this product in ready-to-use form is a maximum of 600 g/L.

Storage

The guaranteed shelf life of 48 months from date of manufacture. Use no later than the date indicated on the label and store in original container at +20 C (68 F).

Matting Component -ALN 775 106-

Definition: Matting Component -ALN 775 106- Edition 04/2013 Product Description ...

Structuring Component

Definition: Structuring Component, Fine -ALN 775 108- Edition 04/2013 Product Description ...

Other materials:

Volkswagen Touran Owners Manual. Waxing and polishing the vehicle
First read and observe the introductory information and safety warnings Waxing Waxing protects the paintwork. You will need to wax the vehicle with a good hard wax at the latest when the water does not clearly form small drops and run off the paintwork when it is clean. Even if a wax solut ...

Volkswagen Touran Service Manual. Tires, Dismounting, Wheels without and with Tire Pressure Monitoring System
If equipped check the tire pressure monitoring sensor with the vehicle diagnostic tester and if necessary replace. Note When cleaning disc wheel (rim), the tire pressure monitoring sensor (if equipped) must not come into c ...