Volkswagen Touran Service Manual: Release Tool Set -VAS1978/35

Volkswagen Touran Service Manual / Electrical System / Wiring / Wiring Harness and Connector Repairs / Release Tool Set -VAS1978/35

The Release Tool Set -VAS1978/35- is used to release the various primary and secondary locking mechanisms on VW-group vehicles. The set consists of 26 different tools which can be used to professionally release or assemble e.g. round connector systems, flat terminals with one or two locks as well as single wire seals.

The allocation of the correct release tools to the respective locking mechanisms can be found in the table in the Release Tool Set -VAS1978/35- Operating Instructions.

Wiring Harness Repair Set -VAS1978A

The new Wiring Harness Repair Set -VAS1978A- makes optimal repair quality possible in the realm of vehicle electronics. Using the new pliers, repairs affecting harnes ...

Crimping Pliers with Insert

The Crimping Pliers without Insert -VAS1978/1- with Crimping Pliers - Insert 2 -VAS1978/2- is a component of the Wiring Harness Repair Set -VAS1978- and is used to cr ...

Other materials:

Volkswagen Touran Owners Manual. Information on fuel consumption
First read and observe the introductory information and safety warnings The figures quoted for fuel consumption and emissions do not refer to an individual vehicle. Their purpose is to enable comparisons to be made between various vehicle types. Fuel consumption and CO2 emissions not only ...

Volkswagen Touran Service Manual. Fender Corrosion Repair Measures, in Wheel Housing Liner Contact Area
Note The corrosion protection in the fender seam must be applied on all replacement parts, on which the attached seal is not already present. The additional corrosion protection seal will prevent "chafe marks" in the fender wheel housing liner. &nb ...