Volkswagen Touran Owners Manual: Switching the TCS on and off
Fig. 137 In the centre console: button for switching the TCS on and off manually
First read and observe the introductory information
and safety warnings The electronic stabilisation programme (ESP) will function only if the engine is running. It consists of ABS, EDL and TCS.
When the engine is running, the TCS can be switched off by pressing the button
. The TCS should only be switched off in certain
situations when the traction achieved is not sufficient. For example:
- When driving in deep snow or on loose surfaces.
- When rocking the car backwards and forwards to free it from mud.
Then press the button to switch the TCS back on
.
Brake assist systems
First read and observe the introductory information
and safety warnings The brake assist systems ESP, ABS, BAS, TCS and EDL will
only function when the engine is running. They make a considerabl ...
Brake fluid
Fig. 138 In the engine compartment: cap
of the brake fluid container (variant 1)
Fig. 139 In the engine compartment: cap
of the brake fluid container (variant 2)
First read and observe the int ...
Other materials:
Volkswagen Touran Owners Manual. Introduction
This chapter contains information on the following subjects:
→ Technical requirements
→ Fitting the removable ball coupling
→ Removing the ball coupling
→ Hitching and connecting the trailer
→ Loading ...
Volkswagen Touran Owners Manual. Hill Hold assist
First read and observe the introductory information
and safety warnings The Hill Hold assist function actively holds the vehicle
when pulling away on an incline.
The hill hold assist function is automatically activated if the following
conditions are met
Cond ...
