Fig. 75 Turn signal and main beam lever in the initial position.
First read and observe the introductory information and safety warningsMove the lever into the desired position:
Return the lever to the initial position to switch off the current function.
Lane change flash
To operate the lane change flash, push the lever up or down to the point where you incur resistance and then release lever. The turn signal flashes three times.
The lane change function can be switched off via the Light & vision menu in the instrument cluster display . In vehicles without the Lights & vision menu, the function can be disabled by a qualified workshop.
WARNING
Incorrect use of the main beam headlights can lead to accidents and serious injuries as the main beam headlights could distract and dazzle other road users.The turn signal will only work when the ignition is switched on. The hazard warning lights also work when the ignition is switched off .
If one turn signal fails on the vehicle or on the trailer, the indicator lamp will start flashing twice as fast.
The main beam headlights can only be switched on if the dipped beam headlights are already on.
Volkswagen Touran Owners Manual. Indicator lamp
First read and observe the introductory information
and safety warnings
Lit up
Possible cause
Correction
Windscreen washer fluid level
too low.
Fill up the washer
fluid reservoir as soon as possible .
...
Volkswagen Touran Service Manual. Battery Safety Label
Battery Safety Label
1. -
When working in the area of batteries, fire, sparks, open
flame and smoking are prohibited. Avoid sparks when working with
cables and electrical devices, and from electrostatic discharge.
Avoid s ...