Volkswagen Touran Service Manual: Two-Part HS Clear Coat

Volkswagen Touran Service Manual / General Paint Information / Original Products / Clear Coats / Two-Part HS Clear Coat

Definition:

Two-Part HS Clear Coat -L2K 769 500 A5-

Edition 10/2012

Product Description

Two-part HS clear coat is a VOC compliant, high-quality high solid clear coat.

Properties:

Easy to process

Variable uses for two-part HS and two-part VHS hardeners

Good spreading properties

Brilliant surface finish

Application Instructions

Base Surface

Suitable preliminary coatings:

Water-based base paints

Suitable pre-treatment materials:

l	Dependent on the object and base surface, according to our structure recommendations.

Processing with Two-Part HS Hardeners

Mixture ratio:

2:1 by volume with:

Two-Part HS Hardener -LHA 009 041 A3-

Two-Part HS Hardener, Short -LHA 021 004 A3-

Two-Part HS Hardener, Extra Short -LHA 009 046 A2-

Two-Part HS Hardener, Long -LHA 009 047 A3-

Two-Part HS Hardener, Extra Long -LHA 009 048 A3-

See technical application information two-part HS hardener. Refer to → Chapter "Two-Part HS Hardener".

Processing time/pot life:

Ready for spraying in 90 minutes at +20 C (68 F)

Application type "coat"

Processing viscosity at +20 C (68 F) material temperature is the mixing viscosity for "Compliant" and "HVLP".

Set spray nozzle (see manufacturer's information): "Compliant" 1.3 to 1.4 mm.

Set spray nozzle (see manufacturer's information): "HVLP" 1.3 to 1.5 mm.

Set spray pressure (see manufacturer's information): "Compliant" to 2.0 to 2.5 bar.

Set atomizing pressure (see manufacturer's information): "HVLP" 0.7 bar.

The recommended dry layer thickness is between 50 and 60 mm.

Processing with Two-Part VHS Hardeners

Mixture ratio:

3:1 by volume with:

Two-Part VHS Hardener -LHA 009 051 A2-/-LVM 009 051 A5-

Two-Part VHS Hardener, Short -LHA 009 050 A2-

Two-Part VHS Hardener, Long -LHA 009 052 A2-/-LHA 009 052 A3-

Two-Part VHS Hardener, Extra Long -LHA 009 053 A2-

See technical application information for the two-part VHS hardener. Refer to → Chapter "Two-Part VHS Hardener and Two-Part VHS Performance Hardener".

Thinner:

Two-Part Thinner, Special -LVM 009 200 A2-/-LVM 009 200 A5-

Processing time/pot life:

Ready to spray in 60 to 90 minutes at +20 C (68 F)

Application type "coat"

Processing viscosity at +20 C (68 F) material temperature is the mixing viscosity for "Compliant" and "HVLP".

Add 12.5 to 15 % Two-Part Thinner, Special -LVM 009 200 A2-/-LVM 009 200 A5-.

Set spray nozzle (see manufacturer's information): "Compliant" 1.3 to 1.4 mm.

Set spray nozzle (see manufacturer's information): "HVLP" 1.3 to 1.5 mm.

Set spray pressure (see manufacturer's information): "Compliant" to 2.0 to 2.5 bar.

Set atomizing pressure (see manufacturer's information): "HVLP" 0.7 bar.

1.5 spray applications are required to get the recommended dry layer thickness of between 50 and 60 mm.

Drying

Air dry at +20 C (68 F) room temperature:

Dust dry after 40 to 50 minutes

Ready for assembly after 4 to 6 hours

Dry overnight

The drying time with forced drying is at least 5 to 10 minutes.

Forced dry at +60 C (140 F) object temperature for 30 to 40 minutes

Final drying time for IR drying is at least 5 minutes.

IR dry with a short-wave heater for 10 to 15 minutes and with a medium-wave heater for 15 to 20 minutes

Special Instructions

Elastification for rigid and semi-rigid plastics:

The base material must first be mixed with 15 % Elastic Additive -ALZ 011 001-.

Mixture with two-part HS hardeners, 2:1

Mixture with two-part VHS hardeners, 3:1 with 15 % thinner (drying period is lengthened).

Personal Protective Equipment:

Note the safety data sheets

Wear the personal protective equipment during application

Characteristics

Flashpoint:	above +23 C (73.4 F)
VOC value: 2004/42/IIB(d)(420)420	The EU limit for this product (product category IIB.b) in ready-to-use form is a maximum of 420 g/L volatile organic compounds. The VOC-value of this product in ready-to-use form is a maximum of 420 g/L.

Storage

The guaranteed shelf life of Two-Part HS Clear Coat -L2K 769 500 A5- is 48 months from date of manufacture. Use no later than the date indicated on the label and store in original container at +20 C (68 F).

Clear Coats

...

Two-Part MS Matte Clear Coat

Definition: Two-Part MS Matt Clear Coat -L2K 769 020 A2- Edition 08/2013 Product Description ...

Other materials:

Volkswagen Touran Owners Manual. Vehicle key
Fig. 17 Vehicle key Fig. 18 Vehicle key with alarm button First read and observe the introductory information and safety warnings Vehicle key The key can be used to lock and unlock the car from a distance . The remote control transmitter and the battery are integrated in ...

Volkswagen Touran Owners Manual. Lights and vision – functions
First read and observe the introductory information and safety warnings Parking lights When the parking lights (left and right turn signals) are switched on, the headlight and the tail light on the corresponding side of the vehicle light up. The parking light will only light up when th ...