VW Touran manuals

Volkswagen Touran Service Manual: Two-Part HS Optimum Clear Coat

Definition:
Two-Part HS Optimum Clear Coat -LZK 769 K02 A5-
Edition 10/2012
Product Description
Two-part HS optimum clear coat is a VOC compliant (VOC value less than 420 g/L), high-quality and productive high solid clear coat.
Properties:
Easy and economical processing
Very good spreading properties
Dries very quickly
Very good IR drying
Quick and easy to polish
High-gloss result
Application Instructions
Base Surface
Suitable preliminary coatings:
Water-based base paints
   
Processing
Mixture ratio:
  3:1 by volume with:
Two-Part VHS Hardener -LHA 009 051 A2-/-LVM 009 051 A5-
Two-Part VHS Hardener, Short -LHA 009 050 A2-
Two-Part VHS Hardener, Long -LHA 009 052 A2-/-LHA 009 052 A3-
Two-Part VHS Hardener, Extra Long -LHA 009 053 A2-
See technical application information for the two-part VHS hardener. Refer to → Chapter "Two-Part VHS Hardener and Two-Part VHS Performance Hardener".
For elastification → Anchor.
  Two-Part HS Optimum Clear Coat
Processing time/pot life:
  Ready to spray in 80-100 minutes at +20 C (68 F)
  Two-Part HS Optimum Clear Coat
Application type "coat"
  Two-Part HS Optimum Clear Coat
  Processing viscosity at +20 C (68 F) material temperature is the mixing viscosity for "Compliant" and "HVLP".
  Two-Part HS Optimum Clear Coat
  Set spray nozzle (see manufacturer's information): "Compliant" 1.2 to 1.3 mm.
  Set spray nozzle (see manufacturer's information): "HVLP" 1.3 to 1.4 mm.
  Set spray pressure (see manufacturer's information): "Compliant" to 2.0 to 2.5 bar.
  Set atomizing pressure (see manufacturer's information): "HVLP" 0.7 bar.
  Two-Part HS Optimum Clear Coat
  Apply 1.5 coats.
  Note
During the spray application process, the first half spray application should form a thin, nearly complete film upon which a fully-completed spray application can be applied.
  The recommended dry layer thickness is between 45 and 55 mm.
  Two-Part HS Optimum Clear Coat
Drying
Air dry at +20 C (68 F) room temperature:
Dust dry after 40 to 50 minutes
Ready for assembly after 4 to 6 hours
Dry overnight
  Two-Part HS Optimum Clear Coat
Final drying time with forced drying is a minimum of 5 to 10 minutes.
  Two-Part HS Optimum Clear Coat
Forced drying at +60 C (140 F) object temperature with:
Two-Part VHS Hardener -LHA 009 051 A2-/-LVM 009 051 A5- for 20 to 25 minutes.
Two-Part VHS Hardener, Short -LHA 009 050 A2- for 15 to 20 minutes.
Two-Part VHS Hardener, Long -LHA 009 052 A2-/-LHA 009 052 A3- for 20 to 30 minutes.
Two-Part VHS Hardener, Extra Long -LHA 009 053 A2- for 25 to 35 minutes.
  Two-Part HS Optimum Clear Coat
Final drying time for IR drying is a minimum of 5 to 10 minutes.
  Two-Part HS Optimum Clear Coat
IR dry with short-wave heater for 8 to 12 minutes
  Two-Part HS Optimum Clear Coat
Special Instructions
Elastification for rigid and semi-rigid plastics:
The base material must first be mixed with 15 % Elastic Additive -ALZ 011 001-.
Mixing two-part VHS hardeners, 3:1 with 5 % thinner (drying extends this).
  Two-Part HS Optimum Clear Coat
Personal Protective Equipment:
Note the safety data sheets
Wear the personal protective equipment during application
Characteristics
  Two-Part HS Optimum Clear Coat
Flashpoint: above +23 C (73.4 F)
VOC value: 2004/42/IIB(d)(420)420 The EU limit for this product (product category IIB.b) in ready-to-use form is a maximum of 420 g/L volatile organic compounds. The VOC-value of this product in ready-to-use form is a maximum of 420 g/L.
 
     
Storage
The guaranteed shelf life of Two-Part HS Optimum Clear Coat -LZK 769 K02 A5- is 48 months from date of manufacture. Use no later than the date indicated on the label and store in original container at +20 C (68 F).
  Two-Part HS Optimum Clear Coat
Two-Part HS Vario Clear Coat
Definition: Two-Part HS Vario Clear Coat -L2K 769 K01 A5- Edition 06/2013 Product Description ...

Two-Part HS Optimum Plus Clear Coat
Definition: Two-Part HS Optimum Plus Clear Coat -LZK 769 K07 A5- Edition 04/2013 Product Description ...

Other materials:

Volkswagen Touran Owners Manual. Air recirculation mode
First read and observe the introductory information and safety warnings General notes There are different types of air recirculation mode: Manual air recirculation mode (Heating and fresh air system). Manual air reci ...

Volkswagen Touran Owners Manual. Centre covers
Fig. 202 Removing the centre covers by pulling Fig. 203 Removing the centre covers by turning First read and observe the introductory information and safety warnings Depending on the design, the centre cover can be removed by pulling   or turning  . Vehicles with centre covers th ...

© 2016-2024 Copyright www.vwtouran.net | 0.0066