Fig. 71 On the rear seats: figures Ⓐ and Ⓑ illustrate the main securing points for the child restraint system on the lower retaining rings and top tether. Figure Ⓒ shows how to secure the child restraint system using the vehicle's seat belt
First read and observe the introductory information and safety warningsAlways secure child seats properly, safely and in accordance with the instructions from the child seat manufacturer.
The fitted child seat must sit close to the vehicle seat and must not be able to move or tip more than 2.5 cm.
Child seats that are intended to be secured using the Top Tether must be secured using the Top Tether in the vehicle . Attach the top tether only to the retaining rings fitted for this purpose. Not all fastening rings can be used with the top tether. Always pull the top tether tightly so that the child seat is secure and fits closely to the seat.
Country-specific securing systems
Variants of the attachment system :
Retaining rings and top tether.
USA: LATCH (Lower Anchors and Tethers for CHildren).
Canada: lower universal anchorages.
.
The systems are made up of attachments for child restraint systems with a top tether and lower anchoring points in the seat.
Volkswagen Touran Service Manual. Tire Wear, Outer Shoulder
Improper Use of Air Suspension Height Adjustment
The use of off road levels is only recommended when driving
off road. The permanent use of off road levels on normal roads
can lead to increased tire wear because the changed height
change ...
Volkswagen Touran Service Manual. CAN Bus Wires, Repairing
Unshielded two-strand wiring -1-
and -2- with a cross section of
0.35 mm2 or 0.5 mm2
can be used as CAN bus wiring.
The color coding of CAN bus wires can be found in the
following table:
...