Volkswagen Touran Service Manual: Vehicle Diagnostic Tester, Connecting, Golf MY 1998 through 2003

Volkswagen Touran Service Manual / Electrical System / Wiring / Vehicle Diagnosis, Testing and Information Systems / Vehicle Diagnostic Tester, Connecting, Golf MY 1998 through 2003

Apply the parking brake.

In vehicles with automatic transmission, move the selector lever to the "P" or "N" position.

In vehicles with manual transmissions, move the shift lever to the neutral position.

Remove trim -1- in direction of -arrow-.

With the ignition switched off, connect the Vehicle Diagnostic Tester with the Diagnostic Cable to the diagnostic connection -arrow- in the vehicle.

Turn on the ignition.

Turn off all electrical consumers.

Note

The connection of all other and the following diagnostic operation system or vehicle diagnosis and service system occurs in the previously described sequence.

Vehicle Diagnostic Tester, Connecting

Special tools and workshop equipment required Vehicle Diagnostic Tester Vehicle Diagnosis System - Diagnostic Cabl ...

Wiring Harness and Connector Repairs

...

Other materials:

Volkswagen Touran Owners Manual. Lifting the vehicle with the jack
Fig. 208 The jacking points Fig. 209 Jack at the rear on the left-side of the vehicle First read and observe the introductory information and safety warnings The jack may be applied only at the jacking points shown (markings on the body) . Always use the jacking point closest to the w ...

Volkswagen Touran Service Manual. Run-Flat Tire PAX, Wheel Alignment and Adjustment
The chassis adjustment is done on vehicle with tires with emergency running characteristics (PAX) in the same way as on vehicle that are equipped with conventional tires. Generally, the same gauge heads and mounts that are suitable for c ...