Fig. 51 Warning lamp in the instrument cluster
First read and observe the introductory information and safety warningsLights up or flashes | Possible cause | Correction |
---|---|---|
The driver and front passenger seat belts are not fastened (if the front passenger seat is occupied). | Fasten seat belts. | |
There are items on the front passenger seat. | Remove items from the front passenger seat and stow them safely. |
Several warning and indicator lamps will light up briefly when the ignition is switched on while the vehicle runs functional checks. They will switch off after a few seconds.
An audible signal will be emitted for some seconds if the seat belts are not fastened as the car pulls off and reaches a speed of more than 25 km/h (15 mph) or if the seat belts are unfastened while the vehicle is in motion. The seat belt warning lamp will also flash .
The seat belt warning lamp does not go out until the driver and front passenger fasten their seat belts while the ignition is switched on.
WARNING
Incorrectly fastened or unfastened seat belts increase the risk of severe or fatal injuries. Seat belts will only offer the optimum level of protection when they are used properly.Volkswagen Touran Owners Manual. Introduction
This chapter contains information on the following subjects:
→ Preparing for a journey and driving safely
→ Driving abroad
→ Driving through water
Depending on where the vehicle is used, it could be a good
idea to have an engin ...
Volkswagen Touran Service Manual. Wheel, Mounting, Audi Assembly Instructions
Vehicles with Tire Pressure Monitoring Sensor.
If wheels are changed (for example, change from summer to
winter tires), wheel electronics send data as soon as speed of
new wheels exceeds 25 km/h (15.53 mph). The control module
automatica ...