VW Touran manuals

Volkswagen Touran Service Manual: Cruise Control System

General Description
Cruise control system functions are controlled by the engine control module.
  Cruise control system can be activated/deactivated. Refer to → Chapter "Cruise Control System, Activating and Deactivating".
DTC Recognition and Display
Malfunctions in relation to the cruise control system are sent via the engine control module.
Use the Vehicle Diagnostic Tester in the "Guided Fault Finding" mode for fault finding.
  Connect the Vehicle Diagnostic Tester. Refer to → Chapter "Vehicle Diagnosis, Testing and Information Systems".
 
  On the Vehicle Diagnostic Tester, select "Guided Fault Finding".
  Using the "GO TO" button, select "Functions/Component selection" and the following menu options in sequence:
Powertrain
Engine code
01 - On Board Diagnostic (OBD) capable systems
Engine management system or Diesel Direct Injection & Glow Plug System
Functions
Cruise Control System, Activating and Deactivating
   

Special Tools

Special tools and workshop equipment required
   
Battery Charger -VAS5903-
  Special Tools
Battery Tester -VAS6161-
  Special Tools
    Severely Discharged Batteries
      WARNING Risk of injury. Follow all Warnings and Safety Precautions. Refer to → Chapter "Warnings and Sa ...

    Windshield Wiper/ Washer System
    ...

    Other materials:

    Volkswagen Touran Owners Manual. Indicator lamps
    First read and observe the introductory information and safety warnings  Lit up Possible cause Correction Vehicle lighting not working partially or completely. Change the corresponding bulb   or if all bulbs ...

    Volkswagen Touran Owners Manual. Introduction
    This chapter contains information on the following subjects:  → Warning and indicator lamps    → Information on steering  The power assistance is not hydraulic. It is an electro-mechanical system. The advantage of this steering system is that no hydraulic hoses, hydraulic oil ...

    © 2016-2019 Copyright www.vwtouran.net | 0.0033