Volkswagen Touran Service Manual: General Information
| The following descriptions also apply to Left Rear Cigarette
Lighter -U3-, Right Rear Cigarette Lighter -U7-, Rear Cigarette
Lighter -U9-, 12 V Socket 2 -U18-, 12 V Socket 3 -U19-, 12 V
Socket 4 -U20-, Cigarette Lighter 2 -U25- and 12 V Socket 5
-U26- if they are illuminated. |
Caution
| Using force to remove cigarette lighter sockets
without illumination can result in damage to the
mounting sleeve retainers. |
| The Cigarette Lighter Release Tool -T40148- can only
be used to remove cigarette lighter sockets with
illumination. |
| The puller is not capable of releasing the retainers
on power sockets without illumination. |
| Sockets without illumination usually cannot be
removed without damage. |
|
Caution
| Using force to remove cigarette lighter sockets
without illumination can result in damage to the
mounting sleeve retainers. |
| The Cigarette Lighter Release Tool -T40148- can only
be used to remove cigarette lighter sockets with
illumination. |
| The puller is not capable of releasing the retainers
on power sockets without illumination. |
| Sockets without illumination usually cannot be
removed without damage. |
|
| On some vehicle equipment levels, socket illumination is via
Light Emitting Diode (LED) instead of a bulb. These LEDs are
integrated with the illumination housing and cannot be serviced
or replaced separately. |
| Various versions of illumination housing with bulb exist.
One version allows separate replacement of the illumination
bulb, and another where the bulb cannot be serviced or replaced
separately. In this case, the entire illumination housing must
be replaced. |
| There are different versions of the sockets and cigarette
lighter sockets due to different installation locations and
construction. The differences are primarily In the length and
type of electrical connectors. On sockets or cigarette lighter
sockets with an electrical cable pig tail, additional work may
be necessary to access the connector. |
|
|
|
Caution
Using force to remove cigarette lighter sockets
without illumination can result in damage to the
mounting ...
Other materials:
Overview - Tire Pressure Monitoring Sensor without Valve
1 -
Valve Cap
2 -
Nut
Individual component of -item 7-
→ Item
Tightening specification. Refer to
→ Anchor.
Always replace if removed
3 -
W ...
Connecting Service Station
A/C Service Station, Connecting for Measuring and Testing
Turn off the ignition.
Connect the A/C service station to the power supply.
Connect quick-release coupling adapter to charging hoses o ...
Changing bulbs in the tail light cluster in the body
Fig. 222 A: removing the trim B: detaching
the connector and removing the bulb holder
First read and observe the introductory information
and safety warnings The actions should be carried out in the given order
only.
Removing the tail light cluster
The jobs ...
© 2016-2019 Copyright www.vwtouran.net
Overview - Cigarette Lighter -U1