Volkswagen Touran Owners Manual: Information stickers and plates
First read and observe the introductory
information and safety warnings
Safety certificates, stickers and plates containing important information on operating the vehicle are factory-fitted in the engine compartment and on certain parts such as the tank flap, front passenger sun visor, the driver door pillar or in the luggage compartment floor.
- Never remove or damage the safety certificates, stickers and plates. They must remain legible at all times.
- If vehicle parts bearing safety certificates, stickers or plates are removed from the vehicle, replacement safety certificates, stickers or plates with the same information must be applied properly to the new parts by the qualified workshop.
Safety certificate
A safety certificate on the door pillar of the driver door provides the information that all necessary safety standards and specifications of the transport safety authorities of the individual country have been met at the time of production. The month and year of production as well as the chassis number may also be listed.
High voltage warning sticker
There is a sticker near the bonnet lock that provides a warning of the high voltage in the electrical system of the vehicle. The ignition system of the vehicle fulfils the requirements of the Canadian standard ICES-002.
Introduction
This chapter contains information on the following subjects:
→ Information stickers and plates
→ Using the vehicle in other countries and continents
→ Radio recepti ...
Using the vehicle in other countries and continents
First read and observe the introductory
information and safety warnings In the factory, the vehicle is produced
specifically for a certain country and complies with this country's registration
...
Other materials:
Underseal
First read and observe the introductory
information and safety warnings The underside of the vehicle is coated to
protect it from corrosion and damage. The protective coating on the underside of
the vehicle could be damaged when driving. Volkswagen recommends therefore that
the protective ...
Running-in
First read and observe the introductory
information and safety warnings Please follow the regulations concerning
running-in of new parts.
Running in a new engine
A new engine needs to be run in during the first 1,500 km. During its first
few hours of running, the internal friction in the e ...
Evaporator
Caution
Non-approved tools or materials such as leak sealing
additives can cause damage or malfunctions in the
system.
Only use tools and materials approved by the
manufactu ...