VW Touran manuals

Volkswagen Touran Owners Manual: Introduction

This chapter contains information on the following subjects:

 → Indicator lamps  

 → Turn signal and main beam lever  

 → Switching lights on and off  

 → Lights and vision – functions  

 → Main beam control  

 → Masking or switching over headlights for driving abroad  

 →  and functions (orientation lighting)  

 → Headlight range control, instrument and switch lighting  

 → Interior and reading lights  

Observe any country-specific regulations when using vehicle lighting.

The driver is responsible for the correct headlight position and the correct headlight setting.

Additional information and warnings:

WARNING

Headlights which have been set too high and the incorrect use of the main beam could distract and dazzle other road users. This could lead to accidents and serious injuries.
Lights
...

Indicator lamps
First read and observe the introductory information and safety warnings  Lit up Possible cause Correction Vehicle lighting not w ...

Other materials:

Tire Pressure Sensor and Metal Valve, Removing and Installing
Special tools and workshop equipment required Torque Wrench 1410 -VAG1410- and Torque Wrench 1331 5-50Nm -VAG1331-   Place metal valve with rubber seal through rim from inside. &nb ...

Introduction
This chapter contains information on the following subjects:  → Warning lamp and coolant temperature display    → Coolant specification    → Checking coolant level and refilling coolant   Never carry out any work on the engine coolant system if you are not familiar ...

Fitting the rear towing eye
Fig. 228 Rear bumper, right-hand side: screwing in the towing eye First read and observe the introductory information and safety warnings The towing eye is screwed into a threaded hole on the right of the rear bumper  . In vehicles with a factory-fitted towing bracket there is no mount ...

© 2016-2019 Copyright www.vwtouran.net