VW Touran manuals

Volkswagen Touran Service Manual: Silicone Remover -LLS MAX 007-

Definition:
Silicone Remover -LLS MAX 007-
Edition 10/2008
Product Description
The Silicone Remover -LLS MAX 007- is a water-based, reduced-solvent cleaning agent that is rich in active ingredients. The raw material base has specific solvent combinations.
Properties:
Application-oriented product-specific aerosol formulation
Constant atomizing pressure
Aerosol distribution
Highest yield
Professional painting result
Highly effective cleaning- and degreasing agent
Strengthens the adhesion
Highest yield
Even distribution
Application Instructions
Application
Recommended for:
Parts painting and spot repair aid
Best suited for use during the subsequent painting of Aqua Plus water-based paints
Suitable base surfaces:
Primed, filled metal, plastic, glass, old- and factory paint surfaces, painted and unpainted base surfaces
   
Base Surface Suitability
Primed, filled surfaces +++
Factory and old paint +++
Plastic parts +++
Metal/glass +++
 
Properties:
Painted surfaces do not become corroded
Removes all types of silicone, an ideal dirt and soot cleaner
Removes cavity sealant or wax
Removes gummy, dried-on grease residue, for example door hinges
Removes oil and grease residue
Ideal solvent for tar marks
Removes adhesive residue, for example stickers
Processing
  Note
For work safety, wear appropriate, personal protective equipment:
Breathing mask type: A2/P2
Latex or nitrile protective gloves, for example
   
Application type "coat"
  Apply a light coating immediately before applying the subsequent paint layer and right away wipe dry with a clean and dry cloth.
  Do not allow the silicone remover to evaporate off the surface. Only work on small areas at the same time.
  Repeat the cleaning procedure if the surface is very dirty.
  Replace the cloths a few times. Do not use any dirty cloths.
  Note
If the spray application is interrupted, make sure that the valve above the spray head is empty.
  Caution
For work safety, wear appropriate, personal protective equipment.
Note the safety data sheets as well as the warnings on the label of the spray nozzle.
Dispose of the empty spray cans as recyclable material.
Characteristics
  Silicone Remover -LLS MAX 007-
Solid content: 0 %
Yield: Approximately 0.75 to 1.0 m² / spray can
Gloss level: not applicable
VOC value: 620 g/L, 248 g/can
 
     
Storage
The guaranteed shelf life of 36 months from date of manufacture. Use no later than the date indicated on the label and store in original container at +20 C (68 F).
  Silicone Remover -LLS MAX 007-
Two-Part Wash Primer
Definition: Two-Part Wash Primer -LLS MAX 230 M1-, olive green (250 ml) Edition 12/2013 Product Descrip ...

Silicone Remover, Long -LLS MAX 008-
Definition: Silicone Remover, Long -LLS MAX 008- Edition 10/2008 Product Description ...

Other materials:

Brake fluid
Fig. 138 In the engine compartment: cap of the brake fluid container (variant 1) Fig. 139 In the engine compartment: cap of the brake fluid container (variant 2) First read and observe the introductory information and safety warnings Brake fluid will gradually absorb water from the surro ...

Tires, Storing
Storage Room Tire storage must be: Dark, Dry, Cool and Ventilated     ...

Technical Requirements
The wheel and tire combinations or retrofittings listed in the individual vehicle tables refer exclusively to original disc wheels. Release of wheel/tire combinations or retrofittings with disc wheels from the accessories trade is ...

© 2016-2018 Copyright www.vwtouran.net