VW Touran manuals

Volkswagen Touran Service Manual: Two-Part HS Optimum Plus Clear Coat

Definition:
Two-Part HS Optimum Plus Clear Coat -LZK 769 K07 A5-
Edition 04/2013
Product Description
The two-part HS optimum plus clear coat is a VOC compliant high solid clear coat. Optimal application even under unfavorable booth conditions, for example low drying temperature.
Properties:
Flexible and efficient application possible
Dries very quickly
Quick and easy to polish
It is possible to use HS Spot Thinner -LVM 006 000 A2-
Application Instructions
Base Surface
Suitable preliminary coatings:
Water-based base paints
   
Processing
Mixture ratio:
  3:1 by volume with:
Two-Part VHS Hardener -LHA 009 051 A2-/-LVM 009 051 A5-
Two-Part VHS Hardener, Short -LHA 009 050 A2-
Two-Part VHS Hardener, Long -LHA 009 052 A2-/-LHA 009 052 A3-
Two-Part VHS Hardener, Extra Long -LHA 009 053 A2-
See technical application information for the two-part VHS hardener. Refer to → Chapter "Two-Part VHS Hardener and Two-Part VHS Performance Hardener".
Thinner:
Two-Part Thinner, Special -LVM 009 200 A2-/-LVM 009 200 A5-
Two-Part Thinner, Long -LVM 009 300 A2-
HS Spot Thinner -LVM 006 000 A2-
See the technical application information on the LVM 006 000 A2 HS spot thinner. Refer to → Chapter "HS Spot Thinner".
For elastification. Refer to → Anchor.
  Two-Part HS Optimum Plus Clear Coat
Processing time/pot life:
  Ready to spray in 45 to 60 minutes at +20 C (68 F) (depending on the hardener used)
  Two-Part HS Optimum Plus Clear Coat
Application type "coat"
  Two-Part HS Optimum Plus Clear Coat
  Processing viscosity at +20 C (68 F) material temperature is the mixing viscosity for "Compliant" and "HVLP".
  Two-Part HS Optimum Plus Clear Coat
  Set spray nozzle (see manufacturer's information): "Compliant" 1.2 to 1.3 mm.
  Set spray nozzle (see manufacturer's information): "HVLP" 1.3 to 1.4 mm.
  Set spray pressure (see manufacturer's information): "Compliant" to 2.0 to 2.5 bar.
  Set atomizing pressure (see manufacturer's information): "HVLP" 0.7 bar.
  Two-Part HS Optimum Plus Clear Coat
  Apply 1.5 coats.
  Note
During the spray application process, the first half spray application should form a thin, nearly complete film upon which a fully-completed spray application can be applied.
  The recommended dry layer thickness is between 40 and 60 mm.
  Note
When using as a clear coat for minimal damage repairs (clever repair procedure), 10 % Two-Part Thinner, Special -LVM 0009 200 A2- and Two-Part Thinner, Special -LVM 009 200 A5- can be replaced with 10 % HS Spot Thinner -LVM 006 000 A2 HS-. Do not apply on slanted surfaces.
  Two-Part HS Optimum Plus Clear Coat
Drying
Air dry at +20 C (68 F) room temperature:
Dust dry after 15 to 30 minutes
Ready for assembly after 2 to 5 hours
Dry overnight
  Two-Part HS Optimum Plus Clear Coat
Final drying time with forced drying is 5 minutes.
  Two-Part HS Optimum Plus Clear Coat
Forced drying at +60 C (140 F) object temperature with:
Two-Part VHS Hardener -LHA 009 051 A2-/-LVM 009 051 A5- for 15 to 25 minutes.
Two-Part VHS Hardener, Short -LHA 009 050 A2- for 10 to 15 minutes.
Two-Part VHS Hardener, Long -LHA 009 052 A2-/-LHA 009 052 A3- for 20 to 30 minutes.
Two-Part VHS Hardener, Extra Long -LHA 009 053 A2- for 25 to 35 minutes.
  Two-Part HS Optimum Plus Clear Coat
Final drying time for IR drying is 5 minutes.
  Two-Part HS Optimum Plus Clear Coat
IR dry with short-wave heater for 8 to 12 minutes
  Two-Part HS Optimum Plus Clear Coat
Special Instructions
Elastification for rigid and semi-rigid plastics:
The base material must first be mixed with 15 % Elastic Additive -ALZ 011 001-.
Mixture with two-part VHS hardeners, 3:1 with 10 % Two-Part Thinner, Special -LVM 009 200 A2- or Two-Part Thinner, Special -LVM 009 200 A5- (drying period is lengthened).
  Two-Part HS Optimum Plus Clear Coat
Personal Protective Equipment:
Note the safety data sheets
Wear the personal protective equipment during application
Characteristics
  Two-Part HS Optimum Plus Clear Coat
Flashpoint: above +23 C (73.4 F)
VOC value: 2004/42/IIB(d)(420)420 The EU limit for this product (product category IIB.b) in ready-to-use form is a maximum of 420 g/L volatile organic compounds. The VOC-value of this product in ready-to-use form is a maximum of 420 g/L.
 
     
Storage
The guaranteed shelf life of Two-Part HS Optimum Plus Clear Coat -LZK 769 K07 A5- is 48 months from date of manufacture. Use no later than the date indicated on the label and store in original container at +20 C (68 F).
  Two-Part HS Optimum Plus Clear Coat
    Two-Part HS Optimum Clear Coat
    Definition: Two-Part HS Optimum Clear Coat -LZK 769 K02 A5- Edition 10/2012 Product Description ...

    Two-Part Brilliant Clear Coat
    Definition: Two-Part Brilliant Clear Coat -L2K 769 K04 A5- Edition 10/2010 Product Description ...

    Other materials:

    Volkswagen Touran Service Manual. ACC - Adaptive Cruise Control
      Note On vehicles with ACC, the trim in the right cover section of the front bumper must not be painted if paint repairs or component replacements are performed. The ACC system is located behind this section therefore a coat of paint would ...

    Volkswagen Touran Service Manual. Aqua Premium Touch-Up System
    Definition: Touch-Up Additive For Aqua Premium -LVM 035 100 A3- Edition 10/2012 Product Description To achieve an optically flawless color shade transition in the blended are ...

    © 2016-2019 Copyright www.vwtouran.net | 0.0058