VW Touran manuals

Volkswagen Touran Service Manual: Wax Underbody Protection -D 316 000 A1-

Definition:
Wax Underbody Protection -D 316 000 A1-
Edition 01/2008
Product Description
Wax Underbody Protection -D 316 000 A1- is an exceptional long-term corrosion protection.
The Wax Underbody Protection is based on a solvent-free, oxidative drying system and provides optimal corrosion protection for the body underbody area.
This long-term corrosion protection is established by its excellent adhesion at both very low and high temperatures to the metallic surface.
The product forms a light brown, elastic and non-tacky coating.
It is not necessary to combine the film at an elevated temperature.
Wax Underbody Protection -D 316 000 A1- technical application information
Application
The material is primarily used in the vehicle area.
Make sure that the base surfaces are dry.
The ready-made product is applied using brushes at the material temperature of +20 C (68 F) to 35 C (95 F).
The material can be carefully warmed up to 45 C (113 F) immediately before applying (< 5 minutes) if it is required by the application technique.
The oxidative hardening product can form a film on the surface after a short time. This has no impact on the corrosion protection or other properties.
Properties
Solvent-free
100% active ingredient content
Exceptional long-term corrosion protection
Good adhesion properties
Reduced tendency to drip
Low-temperature flexibility
Long shelf life
  Note
Before starting to apply, it is necessary to read the safety measures and advice in the safety data sheet.
Even for products which are not required to be labeled by law, the usual safety measures must be observed for chemical emissions.
Processing
The surfaces that are to be treated must dry and be free of grease and dust.
Bring the Wax Underbody Protection to the application temperature of 20 to 35 C (68 to 95 F).
Apply the material to the body parts that are to be protected and spread using brushes.
Technical Data
   
Base Mixture of corrosion protection additives with a sulfonate base, alkyd, mineral oil aromatic extracts, pigments, thickening agents, drying agents and fluorescent pigments.
Delivery form/color Light brown, viscous fluid
Rheomat viscosity 1850 +- 350 mPas (System PP50, d= 760 1/s
Density/15 C DIN EN ISO 12185 0.995 +- 0.015 g/ml
Solid matter content 99 +- 1 %
Flashpoint DIN EN ISO 2719 approximately 150 C (302F)
Recommended layer thickness 100-400 mm
Processing temperature 20 to 35 C (68 to 95 F)
Storage At temperatures of +10 C to +30 C (50 F to 86 F) for approximately 12 months
Container 310 ml
Wax Underbody Protection -D 316 D38 A2-
Definition: Wax Underbody Protection -D 316 D38 A2- Edition 04/2009 Product Description ...

Wax Spray -D 322 100 M2
Definition: Wax Spray -D 322 100 M2- Edition 01/2011 Product Description Wax Spr ...

Other materials:

Waxing and polishing the vehicle
First read and observe the introductory information and safety warnings Waxing Waxing protects the paintwork. You will need to wax the vehicle with a good hard wax at the latest when the water does not clearly form small drops and run off the paintwork when it is clean. Even if a wax solut ...

Fender Corrosion Repair Measures, in Wheel Housing Liner Contact Area
  Note The corrosion protection in the fender seam must be applied on all replacement parts, on which the attached seal is not already present. The additional corrosion protection seal will prevent "chafe marks" in the fender wheel housing liner. &nb ...

Using the menus in the instrument cluster
Fig. 12 Vehicles without multi-function steering wheel: press button Ⓐ in the windscreen wiper lever to confirm the menu point and rocker switch Ⓑ to change the menu Fig. 13 Right-hand side of the multi-function steering wheel: controls for the menus in the instrument cluster First rea ...

© 2016-2019 Copyright www.vwtouran.net