Volkswagen Touran Service Manual: Compressor Types, Checking Pressures
 Note
Check cooling performance. The A/C system is functioning
correctly when the air flowing from the instrument panel vents
has a temperature of 70C or lower. |
Setting on Climatronic "LO". |
Setting on A/C system "AC" on; "max"; "cold". |
Connections with valve and service connections for measuring
and checking. |
Check on vehicles with restrictor and reservoir (with
internally regulated A/C compressor). Refer to
→ Chapter "Checking with Restrictor and Reservoir, with
Internally Regulated A/C Compressor". |
Check on vehicles with expansion valve and receiver/dryer
(with internally regulated A/C compressor). Refer to
→ Chapter "Checking with Expansion Valve and Receiver/Dryer,
with Internally Regulated A/C Compressor". |
On vehicles with expansion valve and receiver/dryer (without
regulated A/C compressor). Refer to
→ Chapter "Checking with Expansion Valve and Receiver/Dryer,
without Regulated A/C Compressor". |
Checking pressures for vehicles with restrictor, reservoir
and A/C Compressor Regulator Valve -N280- (externally regulated
A/C compressor). Refer to
→ Chapter "Checking with Restrictor, Reservoir and A/C
Compressor Regulator Valve -N280-, Externally Regulated A/C
Compressor". |
|
|
|
Note
Check cooling performance. The A/C system is functioning
correctly when the air flowing from the instrument panel vents
has a temperature of ...
Note
Connecting service station. Refer to
→ Chapter "Connecting Service Station".
Observe test requirements. Re ...
Other materials:
Volkswagen Touran Owners Manual. Brake fluid
Fig. 138 In the engine compartment: cap
of the brake fluid container (variant 1)
Fig. 139 In the engine compartment: cap
of the brake fluid container (variant 2)
First read and observe the introductory information
and safety warnings Brake fluid will gradually absorb water from the surro ...
Volkswagen Touran Service Manual. Primary Lock
The primary lock is the locking mechanism of an individual
crimp contact in the contact housing.
If necessary, housing securing mechanisms (secondary locks)
must be released or removed using specified tool before
releasing the contacts. ...
© 2016-2025 Copyright www.vwtouran.net | 0.0235
