Volkswagen Touran Service Manual: Primary Lock
| The primary lock is the locking mechanism of an individual
crimp contact in the contact housing. |
| If necessary, housing securing mechanisms (secondary locks)
must be released or removed using specified tool before
releasing the contacts. Refer to
→ Chapter "Secondary Lock". |
| The shapes of the primary locks depicted in the following
are only a selection which, as an example, should make clear the
various functions of the primary lock. |
| Round connector systems. Refer to
→ Chapter "Round Connector Systems". |
| Flat connector systems. Refer to
→ Chapter "Flat Connector Systems". |
| Special connector systems. Refer to
→ Chapter "Special Connector Systems". |
| The allocation of the correct release tool for the
respective locks can be found in the table in the Release Tool
Set -VAS1978/35- Operating Instructions. |
|
|
|
The secondary lock is a housing securing mechanism (second
locking mechanism) that secures all wires in one contact
housing. If a secondary lock is installed at a con ...
Note
If necessary, housing securing mechanisms (secondary locks)
must be released or removed using specified tool before
releasing the contacts. Refer ...
Other materials:
Volkswagen Touran Owners Manual. After changing a wheel
First read and observe the introductory information
and safety warnings
If needed, clean the tools then place them back in the foam rubber holder
in the luggage compartment or behind the side trim on the left-hand side of
the luggage compartment
Stow the spare wheel, temporar ...
Volkswagen Touran Owners Manual. Fitting the front towing eye
Fig. 227 Front bumper, right-hand side:
screwing in the towing eye
First read and observe the introductory information
and safety warnings The towing eye is screwed into a threaded hole on the
right of the front bumper .
The towing eye must always be kept in the vehicle.
Observe the ...
© 2016-2023 Copyright www.vwtouran.net | 0.073
Secondary Lock
Round Connector Systems