VW Touran manuals

Volkswagen Touran Service Manual: Two-Part Clear Coat

Definition:
Two-Part Clear Coat -LLS MAX 210-
Edition 12/2010
Product Description
The Two-Part Clear Coat - LLS MAX 210- is a high-gloss two-component clear coat for long-lasting sealing of painted surfaces. It is specially developed for part- and repair paint jobs. This product is characterized by its resistance to weather and chemicals, an exceptional gasoline resistance and good polishability. The two-part clear coat has good flow properties and tends to be used for larger surfaces (one to two vehicle body parts). The raw material base is acrylic resin. The hardener contains isocyanate.
Properties:
Constant atomizing pressure
Aerosol distribution
Excellent filling ability
Application area: touch up in part- and repair paint job area
Professional painting result
  Note
For work safety, wear appropriate, personal protective equipment:
Breathing mask type: A2/P2
Latex or nitrile protective gloves, for example
Application Instructions
Base Surface
Suitable base surfaces:
Solvent- and water-soluble base paint systems
Old paints, cleaned and sanded
   
Base Surface Suitability
One-part base paint +++
One-part water-based paint +++
Two-part top coat ++
Old paints +++
 
     
Processing
Activating the Two-Part Spray Can:
  Before activating, thoroughly shake the can for two minutes.
  Two-Part Clear Coat
  Remove the red push button on the cap and set it on the valve for the hardener mixture on the bottom of the can.
  Two-Part Clear Coat
  Press in the valve for the hardener mixture. Make sure when pressing down the valve for the hardener mixture that the can (with the cap) is upside down.
  Two-Part Clear Coat
  After activating, thoroughly shake the can again for at least two minutes.
  Two-Part Clear Coat
Processing time/pot life:
  48 hours at +20 C (68 F)
  Note
The processing time depends on the ambient temperature. Higher temperatures lead to a shortened pot life. Lower temperatures lead to a longer pot life.
  Two-Part Clear Coat
Application type "coat"
  Apply one to two spray applications to cover (each application 30 mm) with a 10 to 15 minute intermediate ventilation time, depending on temperature.
Spraying distance:
  Maintain a distance of 20 to 25 cm.
  Note
If the spraying procedure is interrupted, make sure that the valve above the spray head is empty to prevent any nozzle blockage.
  Two-Part Clear Coat
Drying
Air drying at +20 C (68 F) room temperature is 12 hours.
  Two-Part Clear Coat
The drying time with forced drying is at least 10 to 15 minutes.
Forced drying is at +60 C (140 F) object temperature for 35 to 40 minutes.
  Two-Part Clear Coat
The drying time for IR drying is a minimum of 10 to 15 minutes.
  Two-Part Clear Coat
IR dying is recommended.
  Caution
For work safety, wear appropriate, personal protective equipment.
Note the safety data sheets as well as the warnings on the label of the spray nozzle.
Shake briefly again before every subsequent spray application.
Dispose of the empty spray cans as recyclable material.
  WARNING
Coating materials ready for application which contain isocyanate may cause irritation to mucous membranes (especially the respiratory organs) and cause hypersensitive reactions.
Sensitization may occur if vapors and spray mist are inhaled.
Carefully observe all rules for working with coating materials containing solvents when working with coating materials containing isocyanate. Particular care must be taken to prevent inhalation of spray mist and vapor.
Persons suffering from allergies, asthma or other respiratory problems should not work with coating products containing isocyanate.
Characteristics
  Two-Part Clear Coat
Solid content: 33.8 % in relation to thinned paint
Yield: Approximately 0.5 to 0.75 m²/spray can with approximately 30-50 μm dry layer thickness
Gloss level: High-gloss
VOC value: 668 g/L, 258 g/can
 
     
Storage
The guaranteed shelf life is 24 months from production date. Use no later than the date indicated on the label and store in original container at +20 C (68 F).
  Two-Part Clear Coat
Two-Part Filler
Definition: Two-Part Filler -LLS MAX 202 M2-, medium gray Edition 03/2013 Product Description ...

Two-Part Epoxy Primer Filler
Definition: Two-Part Epoxy Primer Filler -LLS MAX 220 M1-, beige (250 ml) Two-Part Epoxy Primer Filler -LLS MAX 22 ...

Other materials:

Volkswagen Touran Owners Manual. Introduction
This chapter contains information on the following subjects:  → An economic driving style   → Driving in a way which will save fuel  Fuel economy, environmental impact and wear on the engine, brakes and tyres depend largely on three factors: Personal driving style. ...

Volkswagen Touran Owners Manual. General information
Fig. 149 In the tailgate: location of the Rear Assist rear-view camera Fig. 150 Rear Assist system display First read and observe the introductory information and safety warnings  Function For vehicles without optical parking system (OPS) or vehicles w ...

© 2016-2024 Copyright www.vwtouran.net | 0.0147