Volkswagen Touran Owners Manual: Warning lamp
First read and observe the introductory
information and safety warnings
| Lit up | Possible cause | Correction |
|---|---|---|
 |
Bonnet not closed properly |  Do not drive
on! Close bonnet. |
Several warning and indicator lamps will light up briefly when the ignition is switched on while the vehicle runs functional checks. They will switch off after a few seconds.
A warning lamp 
appears in the instrument
cluster display if the bonnet is open or not properly closed.
Depending of vehicle equipment levels, a symbol may be shown in the instrument cluster instead of a warning lamp. This indicates that the bonnet is open or not properly closed. These symbols are also visible when the ignition is switched off. The display will go out approximately 15 seconds after the vehicle has been locked with all its doors closed.
WARNING
- Never ignore warning lamps and text messages.
- Stop the vehicle as soon as it is possible and safe to do so.
Introduction
This chapter contains information on the following subjects:
→ Warning lamp
→ Preparing the vehicle for working in the engine compartment
→ Opening and closing the ...
Preparing the vehicle for working in the engine compartment
First read and observe the introductory
information and safety warnings ...
Other materials:
Volkswagen Touran Owners Manual. Information on fuel consumption
First read and observe the introductory information
and safety warnings The figures quoted for fuel consumption and emissions
do not refer to an individual vehicle. Their purpose is to enable comparisons to
be made between various vehicle types. Fuel consumption and CO2 emissions
not only ...
Volkswagen Touran Service Manual. Taper
Taper is caused by slightly offsetting the tread and/or the
belt by a few tenths of a millimeter from the geometric center
of the tire. Taper cannot be recognized visually nor can it be
measured with workshop equipment.
...
