VW Touran manuals

Volkswagen Touran Service Manual: Blender

Definition:
Blender -LLS MAX 009-
Edition 10/2008
Product Description
The Blender -LLS MAX 009- matches the overlapping areas or the edges from the existing paint to the new paint for proper vehicle spot painting. The raw material base has specific resin and solvent combinations.
Properties:
Application-oriented product-specific aerosol formulation
Constant atomizing pressure
Aerosol distribution
Professional painting result
Ideal for spot repair
Easy, time-saving processing
Especially suitable for touch-up repairs with two layer finishes and two-part one-coat finishes
Exceptional etching ability
Polishes well
Produces seamless edges on touch-up surfaces
Application Instructions
Application
Recommended for:
Spot repairs and touch-ups
Suitable base surfaces:
Immediately apply after spraying the Two-Part Clear Coat -LLS MAX 210- or two-part top coat onto the overlapping areas on the touch-up surface.
The base surface in the tapering off/overlapping areas should be sufficiently matted with a sanding pad (P2000-P4000).
Pretreatment:
No special tasks are necessary immediately before apply the blender.
Processing
  Note
For work safety, wear appropriate, personal protective equipment:
Breathing mask type: A2/P2
Latex or nitrile protective gloves, for example
   
Application type "coat"
  In several spray applications, spray onto the spray mist of either the two-part clear coat or two-part top coat until a uniform transition forms.
 
  The two-part clear coat or two-part top coat do not require drying.
  Note
If the spray application is interrupted, make sure that the valve above the spray head is empty.
  Caution
For work safety, wear appropriate, personal protective equipment.
Note the safety data sheets as well as the warnings on the label of the spray nozzle.
Dispose of the empty spray cans as recyclable material.
Characteristics
  Blender
Solid content: 4.8 %
Yield: Approximately 0.5 m² / spray can
Gloss level: not applicable
VOC value: 766 g/L, 306 g/can
 
     
Storage
The guaranteed shelf life of 36 months from date of manufacture. Use no later than the date indicated on the label and store in original container at +20 C (68 F).
  Blender
Silicone Remover, Long -LLS MAX 008-
Definition: Silicone Remover, Long -LLS MAX 008- Edition 10/2008 Product Description ...

Bonding Agent
Definition: Bonding Agent -LLS MAX 015-, plastic Edition 10/2012 Product Description ...

Other materials:

Wheel, Mounting, Volkswagen Assembly Instructions
Vehicles With Tire Pressure Monitoring Sensor. If wheels are changed (for example, change from summer to winter tires), wheel electronics send data as soon as speed of new wheels exceeds 25 km/h (15.53 mph) The control module automatical ...

Function
Fig. 126 In the stowage compartment on front passenger side: toll card reader First read and observe the introductory information and safety warnings Using the toll card system Switch on the radio navigation system and insert a suitable ETC card in the toll card reader   (arrow) ...

Controls on the front seats
Fig. 39 Front left seat controls First read and observe the introductory information and safety warnings The controls are mirrored for the front right-hand seat.   Function Action ① Pushing the front seat forw ...

© 2016-2018 Copyright www.vwtouran.net