Volkswagen Touran Owners Manual: Changing gear using Tiptronic
Fig. 134 Selector lever in Tiptronic position (left-hand drive). Mirror image for right-hand drive vehicles
Fig. 135 Steering wheel with two paddles for Tiptronic
First read and observe the introductory information
and safety warnings Using Tiptronic, the gears can be shifted up and down manually in an automatic gearbox. The gear that is currently selected will be maintained when the Tiptronic programme is selected. This is the case if the system is not carrying out a change of gear due to the current driving situation.
Operating Tiptronic with the selector lever
- Push the selector lever in position D to the right into the Tiptronic gate .
- Gently push the selector lever forwards ⊕ or to the rear ㊀ to shift gear up or down .
Operating Tiptronic with the paddles
- With driving programme D or S selected, use the paddles on the steering wheel .
- Pull the right paddle +
towards the steering
wheel to change up a gear.
- Pull the left paddle – towards the steering wheel to change down a gear.
- To leave the Tiptronic mode, pull the right-hand paddle +
towards the steering wheel for approximately
one second.
The Tiptronic mode will automatically be closed if the paddles are not used for some time.
NOTICE
- When accelerating, the gearbox automatically shifts up to the next gear shortly before the maximum permitted engine speed is reached.
- When shifting down gear manually, the gearbox will not change gear until the engine can no longer be overrevved.
Automatic gearbox: selecting a gear
Fig. 132 Left-hand drive vehicles: selector
lever for automatic gearbox with lock button (arrow)
Fig. 133 Right-hand drive vehicles: selector
lever for automatic gearbox with lock button (arrow) ...
Driving with an automatic gearbox
First read and observe the introductory information
and safety warnings The gearbox changes the forward gears up and down automatically.
Driving down hills
The steeper the gradient, the lower th ...
Other materials:
Restrictor
Caution
Non-approved tools or materials such as leak sealing
additives can cause damage or malfunctions in the
system.
Only use tools and materials approved by the
manufactu ...
Diagonal Washouts
Diagonal wear spots on tires
Diagonal wear spots run at an angle of approximately 45
with respect to the plane of circumference.
They usually occur once, but may also occur several times
along the tire circumference.
...
Folding the backrests on the third row of seats back
Fig. 97 Folding the seats
in the third row back
First read and observe the introductory information
and safety warnings
Pull the loop on the side of the seat in the direction of the arrow . Fold
the backrest back until it clicks into place.
Check that the backrest is ...