Volkswagen Touran Owners Manual: Fastening and unfastening seat belts with two buckles
Fig. 59 Fastening the seat belt on the middle seat in the second row of seats
First read and observe the introductory information
and safety warnings If worn properly, seat belts hold the vehicle occupants in the correct sitting position during an accident or braking manoeuvre, giving occupants maximum protection .
The seat belt for the middle seat in the second row of seats has two buckles.
Fastening the seat belts
Fasten seat belts before every trip.
- Always adjust the rear seat and head restraint correctly .
- Engage the rear seat backrests in an upright position .
- Take hold of the latch plate and pull the belt downwards. Do not twist the belt in the process .
- Insert the latch plate ① securely into the buckle belonging to the occupied seat Ⓐ.
- Take hold of the latch plate and pull it across the passenger's pelvis.
- Insert the latch plate ② securely into the buckle belonging to the occupied seat Ⓑ.
- Pull on the seat belt to ensure that both latch plates are securely engaged in the locks.
Unfastening the seat belts
Unfasten seat belts only when the vehicle is stationary .
- Press the red button in the buckle . The latch plate is released and springs out.
- Press the red button in the buckle . The latch plate is released and springs out.
- Guide the belt back by hand so that it rolls up easily, without twisting the seat belt and without damaging the trim.
WARNING
- The seat belts offer best protection only when the backrests are in an upright position and the seat belts have been fastened properly according to the occupant's height.
- Unfastening seat belts while the vehicle is in motion can lead to severe or fatal injuries in the event of an accident or sudden braking manoeuvre.
A diagram depicting how to fasten a seat belt with two buckles is located on the seat belt.
Fastening and unfastening seat belts
Fig. 57 Inserting the seat
belt latch plate into the buckle
Fig. 58 Removing the latch
plate from the buckle
First read and observe the introductory information
and safety warnings If ...
Seat belt routing
Fig. 60 Correct seat belt
routing and head restraint adjustment
Fig. 61 Correct seat belt
routing during pregnancy
First read and observe the introductory information
and safety warningsR ...
Other materials:
Flat Spots
What is a Flat Spot From Standing?
Terms like flat portion, flattening, are also used as a term
for flat spots from standing.
Flat spots from standing cause vibration, like an
incorrectly balanced wheel. It is important ...
Checking with Expansion Valve, Receiver/Dryer and A/C Compressor Regulator
Valve -N280-, Externally Regulated A/C Compressor
Specified Values
Note
Connecting service station. Refer to
→ Chapter "Connecting Service Station".
Observe test requirements. Refer to
→ Chapter "Pressures, Checking".
&n ...
Introduction
This chapter contains information on the following subjects:
→ Fuses in the vehicle
→ Changing a blown fuse
At the time of print we are unable to provide an up-to-date overview of the locations
of the fuses for the electrical consumers. This is because the vehicle is un ...