Volkswagen Touran Service Manual: Wiring Harness Repair Set -VAS1978A

Volkswagen Touran Service Manual / Electrical System / Wiring / Wiring Harness and Connector Repairs / Wiring Harness Repair Set -VAS1978A

The new Wiring Harness Repair Set -VAS1978A- makes optimal repair quality possible in the realm of vehicle electronics. Using the new pliers, repairs affecting harness connectors and for breaks in wiring can be performed. For this purpose, complete repair wires with terminals already crimped on are used and can be connected to vehicle-specific wiring harness by the use of the four different types of crimp connections. A pair of new crimping pliers with crimping heads and a hot air gun for shrinking the crimp connections provide trouble-free electrical connection.

Note

Additional information:

Refer to Wiring Harness Repair Set -VAS1978A- Operating Instructions.

Upgrade Kit For VAS1978 -VAS1978/50

The Upgrade Kit For VAS1978 -VAS1978/50- is required in order to bring the "old"Wiring Harness Repair Set -VAS1978- up to the new standard of the Wiring Harness Repai ...

Release Tool Set -VAS1978/35

The Release Tool Set -VAS1978/35- is used to release the various primary and secondary locking mechanisms on VW-group vehicles. The set consists of 26 different tools ...

Other materials:

Opening and closing the bonnet
Fig. 172 The bonnet release lever is located in the driver side footwell. Fig. 173 Release lever for opening the bonnet in the radiator grille First read and observe the introductory information and safety warnings Opening the bonnet The lever for opening the bonnet can only be operated ...

Engine pre-heating
Fig. 128 The front left-hand side of the bumper: cover ① and connecting socket ② for engine pre-heating First read and observe the introductory information and safety warnings For the engine pre-heating mode, the engine coolant is heated slowly using a heating element while the vehicle ...

Cleaning seat belts
First read and observe the introductory information and safety warnings The automatic belt will not be able to roll back properly if there is dirt on the belt and thus prevent the seat belt from working properly. The seat belts must never be removed for cleaning purposes. Remove dirt ...