Fig. 218 In the front bumper, right-hand side: removing the headlight
Fig. 219 Changing the bulbs in the headlights
The jobs should be carried out in the given order only: | |
---|---|
1. | Observe and follow the instructions on the checklist . |
2. | Pull the cover forwards in the direction of the arrow . |
3. | Use the screwdriver from the tool kit to unscrew the securing bolt . |
4. | Pull the headlight out. |
5. | Release the connector and pull it off. |
6. | Turn the bulb holder anti-clockwise in the direction of the arrow as far as it will go and pull it out to the rear along with the bulb. |
7. | Replace the defective bulb with a new bulb of the same type. |
8. | Insert the bulb holder into the headlight and turn it clockwise as far as it will go. |
9. | Connect the connector to the bulb holder . The connector should audibly click into place. |
10. | Insert the headlight. |
11. | Use the screwdriver to screw in the securing bolt . |
12. | Place the cover onto the bumper. |
Volkswagen Touran Service Manual. Wheel, Balancing, Tire and Wheel Radial and Lateral Run-Out, Checking
Before beginning balancing, the following requirements must
be fulfilled.
The tire pressure must be OK.
The tire profile must not be worn on one side. The tire
profile must be at least 4 mm.
...
Volkswagen Touran Service Manual. Overview - Tire Pressure Monitoring Sensor with Valve
1 -
Tire Pressure Monitoring Sensor
Supplied complete as a service part
Removing and Installing. Refer to
→ Chapter "Tire Pressure Monitoring Sensor with Valve, Removing and
Installing".
When battery is ...