First read and observe the introductory information
and safety warnings
The central locking system enables you to lock and unlock all the doors, the tailgate and tank flap from one central point:
Special functions for the central locking system can be switched on or off using the Convenience sub-menu in the Settings menu or by a qualified workshop .
The doors, the tailgate and the tank flap can be locked or unlocked manually if the vehicle key or central locking system fails.
Automatic locking (Auto Lock)
If this function has been activated, the vehicle locks itself
automatically upwards of a speed of 15 km/h (9 mph) . The indicator lamp
in the central locking button will light
up when the vehicle is locked .
Locking the vehicle after the airbags have been deployed
The entire vehicle is unlocked if the airbags are activated during an accident. Depending the level of damage, the vehicle can be locked after an accident as follows.
Function | Action |
---|---|
Locking the vehicle from inside: | – Switch the ignition off and then back on
again. – Press the central locking button ![]() |
Locking the vehicle from outside: | – Switch the ignition off and then back on
again. OR: remove the key from the ignition. – Open one of the vehicle doors once. – Lock the vehicle with the vehicle key. |
If the buttons on the vehicle key or one of the central locking buttons are pressed repeatedly within a short period of time, the central locking system will switch off briefly to prevent overloading. The vehicle will then be unlocked. Lock the vehicle if necessary.
Volkswagen Touran Owners Manual. Test after driving for 10 minutes
First read and observe the introductory information
and safety warnings Re-connect the tyre filler hose and check the tyre
pressure on the tyre pressure monitoring display ⑥.
1.3 bar (19 psi / 130 kPa) and lower:
Do not drive on! The tyre cannot be sealed sufficiently
with the b ...
Volkswagen Touran Service Manual. Corrosion Protection for Body, Attached and Welded Parts
Attachments
Coat the insides of the fenders, doors, covers and lids
completely. A spray application wet in wet procedure is
sufficient.
Before assembly, the seal the inside of the attachments with
cavit ...