VW Touran manuals

Volkswagen Touran Owners Manual: Indicator lamps

First read and observe the introductory information and safety warnings

Lights up or flashes Possible cause Correction
Lane departure warning system (Lane Assist) switched on, not active. The system cannot clearly detect the lane. Refer to   .
Lane departure warning system (Lane Assist) is switched on and active.  

Several warning and indicator lamps will light up briefly when the ignition is switched on while the vehicle runs functional checks. They will switch off after a few seconds.

WARNING

Failure to observe the warning lamps and text messages could lead to your vehicle breaking down in traffic, accidents and serious injuries.

NOTICE

Failure to observe the warning lamps and text messages could lead to your vehicle being damaged.
Introduction
This chapter contains information on the following subjects:  → Indicator lamps    → Function    → Switch of the lane departure warning system in the following situations ...

Function
Fig. 155 Windscreen: Lane Assist camera window First read and observe the introductory information and safety warnings Using a camera in the windscreen, the lane departure warning system det ...

Other materials:

Volkswagen Touran Service Manual. Tire Pressure Sensor and Metal Valve, Removing and Installing
Special tools and workshop equipment required Torque Wrench 1410 -VAG1410- and Torque Wrench 1331 5-50Nm -VAG1331-   Place metal valve with rubber seal through rim from inside. &nb ...

Volkswagen Touran Service Manual. CAN Bus Wires, Repairing
Unshielded two-strand wiring -1- and -2- with a cross section of 0.35 mm2 or 0.5 mm2 can be used as CAN bus wiring. The color coding of CAN bus wires can be found in the following table:   ...

© 2016-2026 Copyright www.vwtouran.net | 0.0168