First read and observe the introductory
information and safety warnings
The design of the wheel bolts is matched to the rims. If different rims are fitted, the correct wheel bolts with the right length and correctly shaped bolt heads must be used. This ensures that wheels are fitted securely and that the brake system works properly .
For technical reasons, it is not generally possible to use the wheels from other vehicles. This can also apply to wheels of the same vehicle type.
The tyres and rims approved by Volkswagen are specially matched to the characteristics of the vehicle and make a major contribution to good road holding and safe handling.
Wheel bolts
Wheel bolts must always be tightened with the correct tightening torque .
Rims with bolted on rings
Rims with bolted on rings consist of several components. These components are fastened using special bolts and special fastening technology. This ensures that the wheel functions properly, does not leak, remains safe and runs true. For this reason, damaged rims should be replaced. They may only be repaired by a qualified workshop. Volkswagen recommends using a Volkswagen dealership for this purpose .
Rims with bolted on trims
Rims may have removable trims which are attached to the rim with self-locking bolts. Damaged trims may only be repaired by a qualified workshop. Volkswagen recommends using a Volkswagen dealership for this purpose .

WARNING

WARNING
Handling of wheels and tyres
New wheels and tyresVolkswagen Touran Owners Manual. Centre covers
Fig. 202 Removing the centre covers by
pulling
Fig. 203 Removing the centre covers by
turning
First read and observe the introductory information
and safety warnings Depending on the design, the centre cover can be removed
by pulling or turning .
Vehicles with centre covers th ...
Volkswagen Touran Service Manual. Tire Wear, One Sided
In many causes, this is caused by driving style, but
sometimes it is also caused by incorrect axle adjustment.
Increased One-Sided Wear
One-sided wear, in conjunction with scrub marks on ...